Search results

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

  1. atoughram

    Native ESP8266 BrewPi Firmware - WiFi BrewPi, no Arduino needed!

    Thanks for the help!!
  2. atoughram

    Native ESP8266 BrewPi Firmware - WiFi BrewPi, no Arduino needed!

    I've been running Fermentrack worry free for nearly four years and it's been pretty flawless, I'm running it on an old Brewpi installation of mine, Pi/Arduino combo with a Wemos D1 running my refer, the arduino running the fermenter chamber and a Tilt connected up too - It all works together...
  3. atoughram

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    Yep, no need for negative values or anything over 1.200
  4. atoughram

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    I'm also interested in this. If you are careful with the iSpindel when you power it up, you get crazy gravity readings. Maybe you can un-bind it to the fermenter, turn it on, and then re-bind it? It would be nice to be able to turn off the logging until the sensor has settled out. (I...
  5. atoughram

    Fermentrack integration with Brewers Friend??

    I did but it put them all together, where I wanted some text between the pictures - not sure what I was doing wrong.
  6. atoughram

    Fermentrack integration with Brewers Friend??

    Thank You - I'll be pushing data up to BF for the next month fairly consistently - If you need to use it for debugging.
  7. atoughram

    Fermentrack integration with Brewers Friend??

    Whats with posting pictures?? I hope you can see them. If not, I'll repost this at Brewers Friend.
  8. atoughram

    Fermentrack integration with Brewers Friend??

    CONTINUED Now in Brewers Friend Session, under the fermentation tab, after it's been on and correctly set at 15 minute intervals for eight hours, I'm still only seeing the data I've put into Brewers Friend manually with sampling where I'd expect to see the data that has been pushed also...
  9. atoughram

    Fermentrack integration with Brewers Friend??

    I set it to 15 minute intervals last night and still no change on the BF side. Let me go through the steps I took, maybe there's a mistake in there somewhere. I set up the Fermentrack side of things. (See attachment) Name = Brewers Friend Push Frequency = 15 minutes API Key as given from BF...
  10. atoughram

    Fermentrack integration with Brewers Friend??

    I set things up on the Fermentrac side, is there any setup on the Brewers Friend side? I've asked the same question on the Brewers Friend website.
  11. atoughram

    Fermentrack integration with Brewers Friend??

    Thank you sir!!
  12. atoughram

    RIMs upgrade either slow or SCORCHED!! Please help

    Not trying to be a smart alek, but I don't bother trying to bring my mash to 168. I'm just going to boil it anyhow, and that will denature most everything in it. I've don't it bother ways and haven't noticed a difference.
  13. atoughram

    Fermentrack integration with Brewers Friend??

    Has there been any talk of it? It appears that Brewers Friend can now accept fermentation data tied to a brew session. That would be cool!
  14. atoughram

    [Seattle] Where do you buy grain?

    The Beer Essentials down in Tacoma has pretty good prices. thebeeressentials.com
  15. atoughram

    Washington Electric Hot Liquor Tank

    $100 - But could be converted to a boil kettle. Got a new hot liquor tank so I dont need this one - it's a "Keggle" with a mix of welded and weldless fittings on it. Two stainless valves with camlock fittings for suction and re-circulation. It has a calibrated sight tube for measuring strike...
  16. atoughram

    Fermentrack: Fermentation monitoring & BrewPi-www Replacement for Raspberry Pi

    My first Fermentrack brew started, although I dropped my iSpindle and now need to recalibrate it :(
  17. atoughram

    Distillation equipment

    https://moonshinedistiller.com/
  18. atoughram

    Facelift for my control panel

    https://www.automationdirect.com/adc/Shopping/Catalog/Power_Products_(Electrical)/DC_Power_Supplies/24VDC,_DIN_Rail_Mount 24Vdc power supplies at automationdirect.com
  19. atoughram

    Fishing!

    Some lake Merwin Kokanee in the oven as the final spring snows melt. (It was a few months ago.)
  20. atoughram

    What ph meter are you using

    Id agree on the Milwaukee - I've got the MW104 - A great bench tool but the Pocket Pro+ maybe better in actual use.
Top