Search results

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

  1. R

    Can I use this outlet?

    thanks so much. I wasn't sure if they were different internally. I figured it came down to how you wired it.
  2. R

    Can I use this outlet?

    I am making a toolbox control panel, a combination 110/220v for two brew setups. I am going to make the input removable. I got an outlet from work, four prong, nema L15-30-R. I know this is 3 phase, but can I wire and use it for 240 single phase? Two hot leads, neutral, and ground. Leads...
  3. R

    BrewBoard - Arduino/Webpage control for e-brewery

    Tried to copy the code from the IDE, after creating an account, but not able to. Can view all files but not copy files to my computer. Not familiar with cloud9. Have been looking into doing something like this for some time, and would love to try your code. Is there a way to download the...
  4. R

    My Ugly Junk- Corona Mill Station...

    I saw an Instructable page containing mods for corona mills, and the poster had removed the plate and cotter pin and cut threads on the shaft with a 1/2" die, and replaced the plate and pin with a nut and rubber o-ring. Just curious if anyone has tried this?
  5. R

    Irish Red Ale Raging Red Irish Red Ale

    Brewed this two weeks ago following exact recipe, OG 1.060, 73% efficiency, great color. 15 days in primary, kegged today. Took a gravity reading and it was still 1.022, going to leave in keg one more week to see if it goes down any more before i put it in the kegerator and cool. My mash temp...
  6. R

    Combining two primary regulators?

    I have two dual gauge primary regulators and recently got a second keg, can I couple these together by removing the high pressure gauge from one and replacing it with a nipple to the gas in of the other, creating a dual regulator?
  7. R

    147 degree mash temp?

    been steeping for an hour, will raising temp now,say for another hour or half hour hurt or help? thanks for the reply
  8. R

    147 degree mash temp?

    been mashing for about 45 mins, temp settled at 147 in a 10 gallon mash tun cooler. Is this going to be too low? Iodine test shows no color change. Will this turn out OK. First time mashing in many years. Any help is greatly appreciateed
  9. R

    mini fridge freezer removal

    I am looking for a mini fridge to make a kegerator and most I see have the freezer at the top taking up valuable real estate. Can these freezer sections be removed? Or do I need one without?
  10. R

    Will auber 2352 pid work without RTD attached?

    If I tried this, what input type would I choose?
  11. R

    Will auber 2352 pid work without RTD attached?

    That is the message. I figured that was the problem. Thanks so much.
  12. R

    Will auber 2352 pid work without RTD attached?

    I just plugged my control panel in for the first time to see if everything powers up, and remarkably it did. My question is this, I dont have the RTD yet, will it work for my boil kettle on manual without any type of probe? It powered up and blinks numbers and letters alternately on top and...
  13. R

    Wire gauges for control panel?

    Just happen to have a bunch of 12 gauge wire to use up.
  14. R

    Wire gauges for control panel?

    So 12 gauge stranded will work for everything but the wires for the elements? Which will be 10 gauge stranded.
  15. R

    Wire gauges for control panel?

    I plan on using this schematic for my control box wiring (special thanks to PJ). I can figure everything out but the correct wire gauges for the internal wiring. Wondering if someone can tellme what wire to use throughout? Thanks in advance.
  16. R

    Simple Electric Build....From the Pros

    I am about to start collecting parts for my control panel and the wiring diagram is perfect. I am not great at this stuff but I can get through it, my question to PJ is this. Do you have this diagram with the wire gauges for all of the internal wiring. I know I saw one in a thread but cant...
  17. R

    herms coil length?

    Also, will the 3/8 OD coil be too restrictive to the flow?
  18. R

    herms coil length?

    Is 25', long enough for a germs coil? I planned on buying a 50' coil of 3/8 copper and using half for a counterflow chiller and half for a germs coil. Would this work?
  19. R

    readying for 220v receptacle

    Thanks for the info. Any pics would be great. I should be able to take it from there.
  20. R

    readying for 220v receptacle

    thanks for the reply. I dont plan on using it for anything but brewing. My dryer is gas. Im thinking of future use for someone if I ever sell the house. Does the dryer receptacle mount in the spa box, or is it outside with the spa box in the middle of the circuit as protection? Also curious...
Top