Quantcast

Search results

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

  1. S

    Help with a used Soda Fountain...

    What can be done about that??????
  2. S

    Help with a used Soda Fountain...

    Ok so I figured out what it is.. it's OLD.. it's a Booth, Inc.. Model: Summit... Booth has since been bought by Scotsman (in 1987 i think).. so this bad boy has been around I've got it cleaned up.. it works.. i just have to run my water line.. and buy the syrups.. What i need to know...
  3. S

    Help with a used Soda Fountain...

    Thats another problem.. the tag on the side is worn out.. and all i can see is "UL" (underwriters labratories)... is there usually a place inside of the dispenser that has manufacture names?
  4. S

    Help with a used Soda Fountain...

    it's exactly like this one.. except more banged up.. http://www.acitydiscount.com/pics/md/acitydiscount/md_108264.jpg
  5. S

    Help with a used Soda Fountain...

    Hi Guys.. I'm a brewer.. so.. not much into soda.. I do love a cider (in fact the grahams english cider is a regular brew here!!) anyway.. I was given a 6 head dispenser.. with pumps, and everything needed to work except one hose is busted.. have to replace that.. but.. i have a...
  6. S

    Double IPA Pliny The Bastid

    in that case, i'll start it today :)
  7. S

    Double IPA Pliny The Bastid

    2 weeks primary,, now in secondary.. just to confirm.. when do i start the dry-hopping cycles? now? or wait another bit before starting?
  8. S

    are my bottles going to go boom?

    well.. this was a bit of beer that was going to be tossed... primary had 6.5 gallosn in it for 14 days, and i racked to secondary, instead of trashing it, i just bottled it as I hate to waste beer.. hopefully they'll last that long.. i'll just call my neighbors over on friday and we'lld...
  9. S

    are my bottles going to go boom?

    I got it off here under "Pliney the Bastid" (Pliney the Elder Clone) Thread under IPA's.. smells great.. I may just pop them on wednesday and recap them again to release a bit of pressure.. I went to beer smith, and I'm not sure if my I was wrong when i put it in the computer, but it says...
  10. S

    are my bottles going to go boom?

    66 & 16 <-- lot's of 6's in there.. not a good sign :/
  11. S

    are my bottles going to go boom?

    Brewed an All grain Pliney the Elder clone.. it was a big boil, and the hops didn't absorb as much as I though they would, so I ended up with 6.5 gallons.. Racked over to secondary after 13 days in primary, and i had (obviously) 1.5 gallons left. So, i bottled that extra bit.. and...
  12. S

    Keggle Fitting Leaking: Advise please

    i just jumped out of my window.. sounds worse than it was, mostly symbolic.. window was only about 3 feet off the ground... but still made my point.. i think the fitting knows I mean business now..
  13. S

    Keggle Fitting Leaking: Advise please

    I'm thinking about having him weld it in.. sadly i've already bought the weldless.. i hope that's not a problem.. im so pissed off right now.. i was going to brew pliney the elder today.. now it's a nogo. :( no welders open today that I can find either.. I may try the washer idea.. i'm...
  14. S

    Keggle Fitting Leaking: Advise please

    it's not a lip that protrudes out, it's a "dip" more than a "lip".. the bottom 1/4 of the washer is on the skirt of the keg (which flares out a bit) and that's the problem.. I've tried to beat the hell out of the skirt to flatten it out.. but it's stronger than my hammer
  15. S

    Keggle Fitting Leaking: Advise please

    Hi, I had a welder cut my keg & place the hole for the weld-b-gone basic. However, he put it a bit low on the keg, and there is a bit of a lip at the bottom of the hole. I can't get the fitting in there without it leaking... I'm quite annoyed because i told him to go 2 inches above that...
  16. S

    Target Water Profile for Pliny the Elder Clone

    Target: CA MG NA HCO3 SO4 CL 76 13 9 26 133 56 Local: 15 4 2 25 8 5 good news.. easier to add, than to take away :)
  17. S

    Target Water Profile for Pliny the Elder Clone

    great, our water here in Birmingham is quite soft.. and great for low SRM beers... so shouldn't be really that much tweaking to get to this pliney.. but I want this to be as perfet as possible!!! ($35 worth of hops, it better!! lol)
  18. S

    Target Water Profile for Pliny the Elder Clone

    is that for RRB or is that for Santa Rosa, CA?
  19. S

    BeerSmith Water Profile

    compuserve link is now down.. anyone have a list of target profiles per style?
Top