Search results

Relax, it's a running joke that if someone asks what SWMBO means, we make up all sorts of acronyms. Consider yourself the new guy getting picked on. It's all in good fun...at least it is meant to be.

Ok then. Nevermind... :drunk:

Ha. Good luck. 3 gal cornies go for much more.

(S)he (W)ho (M)ight (B)ite it (O)ff

Yep. 1/2" conduit punch = 7/8" hole = 22mm switch hole.

I know...;) had to ask though, you never know what someone might have lying around. :ban:

From this article: http://www.byo.com/stories/projects-and-equipment/article/indices/20-build-it-yourself/1149-metallurgy-for-homebrewers Copper is a double-edged sword in brewing. It is beneficial before fermentation, but detrimental afterwards. Copper ions react with the hydrogen sulfide...

Anyone happen to have a punch set for 1/16 DIN temperature controllers? Need to cut 4 holes for my temp controllers and timer in my Brutus panel and not looking forward to it, but I'm also not spending $400 on a punch!

Umm...wow!

How about a foot switch - wire it in parallel with the switch contact so either can turn it on. Put the foot switch on a cord and place it where you need it.

Three batches at once?

Have you tried changing the poppets in the suspect keg? I had a keg that seemed to be giving me strange flavors in my beers. Changed the poppets and the problem went away.

You need a tail piece and a nut. http://www.northernbrewer.com/shop/brewing/kegging/dispensing-hardware/shanks

I believe he meant no need to use it on the threaded end of the barb fitting on the inside of your mash tun. No point since any leak would be in the same direction of wort flow.

I've been using an oversized version of this to sparge. Save me Bobby!

Are you purging the head space in your kegs after you hookup the gas? Oxidation perhaps?

I'd stick with stainless pipe if it were me.

No need to replant every year. You cut the bines off at the ground and they come back the next spring.

Wow, best kegerator ever!