• Please visit and share your knowledge at our sister communities:
    Cheesemaking Forum Cast Iron Forum Canning Forum Ceramic Grills
    Espresso Forum Hot Pepper Forums Pizza Oven Forums
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Search results

SSBrew - 728
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Screws for drip pan?

    I just mounted a similar drip tray and I used a 3/8" thick piece of wood that I countersunk screw holes in the back of, super glued screws into the holes and then attached to the front with construction adhesive leaving the threads exposed. I can now slide the drip tray on and off and use wing...
  2. C

    5 Cu Ft Keezer Build

    4 Coats of poly and the drip tray installed- all for now!
  3. C

    5 Cu Ft Keezer Build

    For a drip tray we are using a drip tray from an ice cream machine. Since the sides can't be drilled into due to the coolant lines a plan B was needed. To mount it, I drilled holes that lined up with the mounting holes on the drip tray and used a countersink bit on the back of the board. Then I...
  4. C

    5 Cu Ft Keezer Build

    Kind of skipped over a couple of things- one of the reasons for choosing the trim style was to have the trim on the lid overlap the seam between the lid and body of the freezer. Due to some miscalculations, there wasn't enough clearance for the lid to close. I had to notch the trim on the lid...
  5. C

    5 Cu Ft Keezer Build

    We have an old trunk in what has become the brew room with black trim. Thought it looked kinda cool, so decided to do all the trim gloss black to break up the amount of wood. I used 3/8" thick x3" wide poplar that I primed and gave 2 coats of paint. The base is 1x4 done the same way. The base...
  6. C

    5 Cu Ft Keezer Build

    Thanks! Quite a bit of time has been put in, and have a few more posts to put up tonight.
  7. C

    5 Cu Ft Keezer Build

    The plan is to enclose the keezer in wood so we glued 1/4 oak plywood to the lid and directly to the sides of the freezer. While debating if this would work, we looked on this site and saw someone else had done something similar. To glue to the actual freezer, we couldn't use nails so I took...
  8. C

    5 Cu Ft Keezer Build

    Another shot of the collar off and on the freezer
  9. C

    5 Cu Ft Keezer Build

    The new collar and lid, 2x8 with 1/2 inch plywood.
  10. C

    5 Cu Ft Keezer Build

    After spending a lot of time looking around on here and getting a ton of great ideas from other posts, finally started a keezer project and wanted to post some pics. This is the start- $40 craigslist freezer on a 2x6 base with casters. The base has 2 extensions to hold tanks- hope to add...
  11. C

    Spice, Herb, or Vegetable Beer Jalapeno Cream Ale

    This beer sounds great, definitely going on the to do list!
View older results
Back
Top