Search results

Wouldnt the size need to be different for low pressure propane? Also Onehoppguy I would love to hear more about your tests.

Onehoppyguy, looks like you deal alot w/ low pressure on these banjo burners which should be identical to my blichmanns. So is the size you mentioned the best for fuel, heating or combo. Just looking for a little info. Also can I pick that bit up most places or is it hard to get. Thanks...

Sorry I should have been more clear, I am converting to low pressure propane. So does the 3/32 not sound like a good idea?

I need to drill out my orifices for my blichmann burners, going from high to low pressure lp. What size bit? Thanks for everyones help on this project I hope to post pics soon.

No problem praetoriv, I am a forester for an electric utility, the horrors of electricity are in my mind everyday. Good thing for me it is up off the ground and not a danger, most of the time.

Thanks guys I found them at lowes this morning. They were not by the ground bar kits, I was just having trouble finding them. Thanks for the help.

I probably should have mentioned that the above part # is for the lp conversion kit. I hope to get some answers if that is clear enough.

Thanks Krazydave, you read into my question perfectly. I cant get jfrizzell's link to work for some reason. I have picked up the following ground bar kit. http://www.ebay.com/itm/Square-D-QO-HomeLine-Grounding-Bar-Kit-PK7GTA-NEW-/130482024689 So would one of these each work for the...

Ok, so in the process of my brutus type build and I have some wiring questions. Lonnies plans show a ground,neutral, and hot bus bars. Are all these the same thing? If so doesnt the hot bar need to be insulated? If they are not the same thing, where do I buy neutral and hot bus bars? Not...

Alright I ordered some honeywell vr8200a 2132 solenoid/controls,pilots and thermocouples for my build. The honeywells came w/part 393691 and it says that it is for regulator adjustment of 8-12" wc. I thought these honeywells were meant for low pressure but wouldnt 12" be considered high pressure?

Clear up a couple of things for me. First what qualifies as low pressure? Second, I have already ordered or have all these parts, cant I drill out the orifice w/a specific sized drill bit? Also I assume that the blichmann burners will run just fine off the low pressure if I change them over...

My mistake I thought they were low pressure, why would I need to replace the orifice if thats what they come with? Also I guess these regulators would work with my honeywell 8200 solenoids?

Just want to make sure on something. I will be firing two lwo pressure blichmann burners by the way of a gas beam. Will the regulator that comes w/the blichmanns work for both at the same time. I feel it should but just trying to solve any problems before the become one. thanks

Thanks onehoppyguy, do you know if these can be picked up at lowes/homedepot or is this an online purchase?

Trying to make sure Ive got all this right, is it best to use a needle valve or ball valve, or something else entirely? thanks again

I will probably want to change it the flame somewhat frequently, should this be a ball or needle valve? Thanks for the info on the wire as well.

Thanks, mine will be open to the air so cooling should not be an issue. More questions, I will need to mount some sort of valve to control the flame. What type of valve and where should it go, before or after the solenoid? Also I need to pick up some wire for everything on this project...

Another question on the transformer, could I get by with one, or should I use one for each honeywell?

Ok, that makes sense,just a simple flame sensor more or less. Thanks again for the help, I think an order is going to be placed today.

Am I thinking of this wrong or couldnt I just use the temp probe from my love controller into a thermowell that I already have? Thanks again guys