Search results

I am using 16ga wire to the LED. What size fuse. It is a 240v LED. Is using 16g way overkill or does it even matter? If it only draws <2W according to Auber, do I even need a fuse?

Great. Thank you for clearing that up. Should I put a 15A fuse inline with the LED?

If the black 120v leg is constantly wired to the element, is it and the led essentially always on but under powered?

I do not have contactors but I do have a circuit breaker inline with the 30A 240V power input on my Auber Cube. Auber says to wire from the circuit breaker (Black Wire) directly to the element. The Red wire goes from the breaker to the SSR. Then out from the SSR to the Element. Since the...

What exactly do you mean by run it in parallel. Does that mean a separate wire directly to the LED. Or, do I run my thicker 10ga wire from the SSR to the LED, then to the element. Also, where does the other leg need to come from (Black Wire)?

I am completing my wiring of the AUBER CUBE but am wiring a 240V 22mm yellow LED indicator to show me when the element is working. My question is do I wire it on a separate smaller wire directly from the SSR output, the same spot my 10ga wire goes to the Element. That would be the red wire...

Here is my setup so far. Just finished epoxying the floor, placing the cabinets and setting it up as my man cave/brew station. Will ultimately be three 15 Gallon spike brewing kettles. Just completed putting in a 50A outlet with GFCI breaker in the main garage panel. My question is where...

Interested in the grain mill depending on if you separate everything and the price.

If you are willing to sell me just the control panel I am interested.

Still checking if this stuff is still available and if you are willing to sell mlt, hlt, or control panel?

I'm still an active duty navy diver stationed at NAS Pensacola. Still getting my 15gallon system together. Wouldn't mind seeing your helmet collection.

any pics of the boilermaker

Is this still available.

Payment sent for ultimate sparge arm

Sent you a message. Will take the sparge arm for $125 shipped.

115 Shipped on the sparge arm to zip 32571?

Have my items shipped? Can you please shoot me a tracking number to [email protected] Thanks

Any homebrew groups in Pensacola or Pace/Milton that get together for brew days?

Payment sent for the RTD probes with 1/2" fittings and Blichmann Autosparge.

Just setting up a system to do some homebrew. Got a 15gal spikes kettle and a 10gall igloo mash tun for now and a blichmann hellfire burner. Sort of jumping in full tilt but it is getting a little expensive. Got a chest freezer that I am going to turn into a keezer and just ordered 4 kegs...