Search results

So mandar email pro contato qeu enviei e orçar.

Depois se tu precisar trazer da China, eu tenho os contatos aqui no Brasil que fizeram toda a parte de importação pra mim, do frete ao tramite de impostos, bem tranquilo. Tenha em mente que em cima do preço que a chinesa orçar pra ti, tem que colocar 70% entre impostos e custos de alfandega e...

Tudo bom, eu trouxe uma cervejaria piloto da China de 100L, sao 3 panelas de 100L, 2 fermentadores de 100L, bomba, resfriador, tanque de agua gelada e painel de controle, chegou aqui por mais ou menos R$ 40mil. Eu to montando ela, começo amanha a eletrica e ai vou poder dizr se funciona ou nao...

Tks Steve for the input, just a question, which component do you add to control on how much % do you run the heating elements at? If both 4500W dont cut the boil, then I will have to rething the process and the installation, I will have to make a project to the electrical company to raise...

I did some thinking, more thinking, talked with some electricians and the guy who is manufacturing the heating elements for me and we decided to lower them to 4500W. I also read the great http://www.theelectricbrewery.com/ and exchanged some email with Kal. Here in Brazil, altough the grid...

I forgot to mention that today I pre heat my water with a tankless gas water heater, so my water gets in the HTL at 148C, from there I heat it to 165F to add to the mash.

Great spreadsheet chuckO, thank you very much. I share the brew with friends and we share coasts for grain, hops and energy and I brew 2 times a month max. It is also a pilot brewery for a maybe future production brewery, but I am not sure I will be going the pro way yet. I was reviewing the...

Tks for the reply , I use a 89000 BTU burner and it does the job today, so I guess 9000w will get there and be safer on the house wiring at the same time,

Hello, my hlt, mash and brew kettle are insulated. Would 2 x 4500W on the HLT And 2 x 4500w on the boil kettle be enough for 70 gallons start volume for the boil, 65 gallons final volume? I was thinking about 2 x 5500w but my house breaker if 50A, so a I'd be pushing the limits. I have 3...

I just tried the pump yesterday, with hot water, it will now work and the engine gets stuck, it starts spinning very slowly and sometimes it just stucks. With room temperature water, it will work perfectly.

I designed the system so the hot liquor tank would feed the mash tun via gravity and I add the pump to speed up the process. I open both valves and through gravity the water starts flowing , then I turn on the pump and it gives a burst of water on the outlet and stops.

My kettles have 3/4" connections with ball valve and a use a quick disconnect 3/4" to 1/2" where the hose is attached. I use silicone 1/2" hoses on the inlet and outlet. I have the same configuration in all my three pots. The pump is bellow the kettle. I´ve attached a picture where you...

I´ve already opened it and it seems ok, there was nothing caught inside and and no apparent wear. I will check the priming and try yo use it with the inlet down.

The water is at 77C, there are no leaks on the system. I was reading just now about priming the pump better. I will do some tests with that.

I have a march pump 809 HS since one year and lately it is not pumping hot water anymore. My setup did´t change. When I turn the pump on, it pumps for a second and then stops. The sound of the the pumps changes and it stops pumping. It does pump room temp water normally. Any ideas?

I´ve done a hefeweizen with this yeast and I got the same peanut butter flavor. Will cold condiocnng solve this problem? Tks.