Search results

Fans... I just bought a cheap USB 10cm fan (5V) and was thinking of using it in the kegerator! I'm just wondering, since the GPIO pins on the pi only gives 3.3V am I supposed to use a relay or will the fan just run slower? What are you using for interval and duration out there, should I run it...

Oh, worked the first time... now I get this in the log!? RPINTS: reflashing Arduino failed, moving on anyways, error was: Command '/usr/share/arduino/hardware/tools/avrdude -C/usr/share/arduino/hardware/tools/avrdude.conf -patmega328p -calamode -P/dev/ttyACM0 -b115200 -D...

Ah thanks, actually was pouring a beer but was getting a lot of foam so that might have been it! Ordering a new 9l keg for water that will be easier to calibrate with! Thanks for the great support @RandR+

Thanks that worked great after a reboot! Just restarting the flowmon gave me some errors! What does `PourCould not kick Keg from 1` in the log mean? really need to configure the pulses to... poured maybe 1 dl and it reported above 6dl but that's another problem that can be solved! Anyone using...

I just attached my Uno tonight to and noticed the same error in my logs: 2020-06-05 21:45:32 RPINTS: No such device - Sleeping to try again 2020-06-05 21:45:37 RPINTS: No such device - Sleeping to try again 2020-06-05 21:45:44 RPINTS: Ino new than Hex. manual upload assumed 2020-06-05 21:45:44...

Ah yeah I had the same problem with some sensors I put around the house not that you mention it! Sorry to bother you with another question... I added a ambient sensor and it works great but even tough I don't have a vessel probe connected it shows a value:

Looks awsome! I can print it and test it out to! A suggestion, instead of making the "tower" all the way to the bottom make a 45º piece and extend the tower from that? Will use a bit more plastic but reduces the risk of it breaking at the bottom due to momentum. Oh and while I'm being rude and...

Integration with brewfather seems to be working really well... you can never have to much data right! :D (green is bpm) Fun to see the correlation between fridge temp (black) and BPM (green) with that little "bump" About the Airlock, I'm using this model and I found that I had to tilt it a bit...

I just attached my first device today and it jus shows 0.0 in bpm so I'm going to try this. Thanks for the tip! Could you by any chance measure how far from the bottom the hole should be it would be fantastic!

Taps - expand settings - check "use plaato". I don't have any but for start browsing from this post Plaato post in this thread

1. Install latest raspberry OS with their own image tool 2. go to rpints.com and copy the command `curl -L install.rpints.com | sudo bash` 3. paste it in the console of the Pi or via SSH and follow the instructions 4. Done :D I'm documenting my own install and build over at github

btw, got a error message when upgrading? ´´´ Validating Entries...Success! Checking DB connectivity...Success Connecting to Database! Checking config folder permissions...Success! Upgrading RaspberryPints...error in query 43[CREATE OR REPLACE VIEW `vwKegs` AS SELECT k.id, k.label, k.k] [Unknown...

Oh my god... do you have a donate link or something so I can give something back to you? one last (I hope) stupid question, when connecting things like ds18b20, PIR and RFID is it the *wiring Pi pin* I should enter in the setup, or the physical pin or is it even the GPIO number?

Thanks, I'll prepare for that then! I bought the cheaper YF-S401 flow meters tough but that shouldn't matter

can I ask for a feature @RandR+ if it's not to complicated. I'm planning to add a smaller keg with a continuous water lid, an option in the keg settings for a auto refill mode where it hides the amount left etc. but still counts pours made would be great. Must say I love the software, easy to...

oh something i can help with! Try to just leave them both blank when at the admin page and login. Once in you can head to "Drinker Accounts" on the left side menu and change the name and password of the current admin account in the top row. Don't think you need to do anything in the console at...

that's so freaking awsome, yup selected USB but was worried when it only mentioned that other board typ (alamode? something) I might have missed this somewhere in all the posts but is there a easy way to calibrate the pulses/L. Still waiting for the YF-S401 to arrive in the mail!

What... for real, that's awsome! So I just connect it with USB after connecting the flow meters to any random GPIO's and it just works!

I couldn't agree more, used the new RPI image installer, ran the single bash script and it installed flawlessly... Quick question, I'm going to use flowmeters with a uno (or clone) and I couldn't find any instructions on where to find the ino file to put there? Would gladly help to update the...

I have tried reading back through the pages but didn't find anything. How far should I follow the build instructions over at the site (http://raspberrypints.com/build-flow-meters/) before running the new install command? (` curl -L install.rpints.com | sudo bash`)? Back on page 67 I saw the...