Search results

Update. I did not end up using my portable CO2 charger... I just brought my CO2 tank and pushed the beer that way. I guess I'll try it out another time.

Well I'm travelling with this stuff this weekend. I guess I will report back and let you guys know.

This might be messy... but worth a shot after trying all the other ideas. Take beer QD off (black). Push in top of the beer out post with a small screwdriver. Beer should spray out everywhere. If it does then put it back on and try to dispense. If it does not dispense. Then you need a new QD...

I've done it a bunch as well. One thing to make sure is... Make sure receiving keg is completely closed (lid on).

Bueller?

I've done a bunch of searching on this, have not found enough info and am not sure which route I should go. I'm currently building a jockey box for a family event, which I plan to have for a very long time. Consists of 50' SS coil - 3/8" OD with about 6-8' total of 1/4" ID tubing on each end...

Damn. That's impressive. nice work man!

Thanks for the ideas all. I decided to go with this: 9 lbs 12.0 oz American 2-Row (RAHR) (2.1 SRM) Grain 1 88.6 % 12.0 oz Victory Malt (25.0 SRM) Grain 2 6.8 % 4.0 oz...

Oops I honestly though you wrote.. *This IS with chinook/citra. So thought you posted a different link than what you meant. My bad.

I see this with Amarillo...

Thanks for idea. I did do a chinook IPA and I dry hopped with 1 oz of citra before and it was tasty. But looking for something different...

So spring is approaching and want to make some sort of pale ale/spring brew. Pretty easy to drink, moderate IBUs, but I'm not sure of my hop selection or schedule yet.... Any ideas or recipes you all have used in the past? Here is what I have on hand: Tettnang (German) East Kent Goldings...

You're right. This one hasn't been carbonated fully yet. That's why. Thanks!

So after checking all connection points for leaks etc. with soapy water solution found nothing. Got everything to equilibrium (9psi). I shut the tank off and didn't touch anything else. Checked back later and the primary gauge has dropped. But not the secondary gauge. Where would the loss be...

I am interested as well (but don't need 400 lbs...). Have not seen another thread so I am subscribed for the future.

Here is my fridge from college. Outfitted perfectly... Custom tap handle from a block of red oak spun on the lathe and wood block painted with chalkboard paint. Put on a piece of polished copper pipe on the bottom for looks. Instead of buying a temp controller I adjusted the small screw on the...

Came across this recipe... Pretty psyched to brew this up next week and let it sit in the bottle till December/Winter timeframe :) Thanks! (jmo88)

I was just curious and was thinking about doing the same. I found the ALL-GRAIN recipe elsewhere. I know this is old, but wanted to help out anyway: 11# US Pale 2 row malt .5 oz. Northern Brewer pellet hops 6.5% .5 oz. East Kent Goldings hops 6% .75 oz. Willamette hops White Labs American Ale...

Again thank you to RedIrocZ-28! Picked up 20' of 3/8" OD copper coil from the Depot. Used my CO2 tank as a coil/guide and it turned out great. I do have to admit that I was pretty nervous at first... Go ahead and give a whirl if you want to change your IC.

PM sent.