Search results

Now that I have been using my two temp units i am glad that I put in the switch. At first I thought that it might not be needed but both are plugged into the wall where it's just easier to use the power switch. Also, I find that the LEDs were worth the time as I can just look from across the...

here is a quick outline of my two plugs, switch and lamp light control unit. all done in a 7X5X3 box. quick and easy.

two plug, switch and light control

just finished my twin build. Thanks everyone for the insight on this fun project! One for the kezzer and one fermentation chamber. Only thing left is to add a blue LED light when the cooling is on (thanks radio shack for not having one of those). I went with the 7X5X3" box, 15foot 13Amp ext cord...

cool side

heat side

the innards

the clones

I am in the same boat, the really slow one. hope they come soon as the weather is going to be hot in nor cal soon!

i started my home brewing with extract and this kit. you can find a better deal i am sure at OSH or some big box store. i ended up using the burning in my current all-grain system now. DO NOT TRUST THE THERMOMETER! they are made for high temps. If you are going to go to all grain or 10gal...

nice build, are you able to get 3 6gal carboys in it at a time?

here are my picks of my chugger in a toolbox. i picked everthing up from homedepot last night and did the entire project in 2 hours. have not tested yet, but sure it will work. i was thinking of using two switches, one controlling the pump and one controlling another two plug gfic outlet. after...

Chugger pump Toolbox

inside wireing

GFIC outlet - always on

waterprof switch

i have used my chugger for two batches and dont see any reason to get a march. i just finished building a tool box housing w/ a weather prof switch and gfic outlet all connected by a 25foot ext cord. make sure you protect whatever you get.

i have the same setup that you want to do, make sure that he puts at least 3 1/2" couplers in each keggle. also make sure that 2 are in the bottom part of the keg, this way you can set one for the valve and one for the temp/sight glass, then if you have another 1/2" coupler SS in the middle you...

i just finished putting some SS couplers in my new keggles and after getting home i was wondering if the slag on this inside is something to worry about as far as bacteria goes? Can someone give me sujestions on how to grind it down without hurting the weld? Thanks for the help.