Search results

Aah!!! I overlook the pH value of soda... After my research i found club soda are acidic ranging pH anywhere bw 3.5 to 4.7 when warm or cold carbonated, even decarbonated. I recall failure of recent sour stout i brewed where i used lactic acid to lower the ph due to which sugar conversion in...

I was tinkering over the idea for brewing a beer with club soda instead of water.. Usually soda have added mineral like Potassium sulfate, Sodium chloride, Disodium phosphate, Sodium bicarbonate. First thought of style to brew is German Pils as it would give crisp, may be salty and enhance the...

Few queries: 1) I am planning to install 2000w heating element for my 5gallon (20L) system would that be enough? I feel with start water temp in India around 30°C this should hit 100°C in 30 mins.. 2) How many amp of SSR should i use for the heating element... 15amps? 3) What should be the...

Poor storage and Oxidation are major cause of papery or wet cardboard like taste. Also after fermentation and moving into secondary to mature the mead, minimum amount head space should be kept to avoid contact of oxygen. As Cavpilot2000 mention glass is ideal storage.. Irrespective of vessel...

As rightly mentioned, wilserbrewer bag can do and are easy make.. With some stitching skills you can do at home. I have done same for my small batches for ease of pulling it out and avoid runny mash due to constraint dead space of brew bag. Any thin cotton material will do and lasts almost...

Finally was able to create controller and with very first attempt... Now will work on fabricating the system. Cheers!!!

I tried my hands on etching a PCB results were not encouraging so had to fall back on professionals.. Do a local guy who will get the job done for $30 for 25 PCB board with masking. Now question: what type of material should be used for PCB for this project... How does it impact? Metal, FR-4...

Hello, I am moving to Ipswich in Nov2018, and wanted to know if there is any home brew group in Ipswich. Thanks ip

Thanks....

Need help!! I am trying etch Daniel Xan PCB at home.. but i am not sure how to print it in actual size.. Can someone help me with the pdf to print it directly..