• Please visit and share your knowledge at our sister communities:
    Cheesemaking Forum Cast Iron Forum Canning Forum Ceramic Grills
    Espresso Forum Hot Pepper Forums Pizza Oven Forums
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Search results

Yakima 728
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    My E-HERMS Build - LOTS OF PICS

    used the trub filter on 4 batches so far. only had an issue with an ipa. used alot of pellet hops 8+ oz. probably will use whole hops for ipas in the future. priming with pump after the filter is a bit tricker..just seems to take longer to get a steady flow out of the filter.
  2. C

    My E-HERMS Build - LOTS OF PICS

    using this probe - http://www.auberins.com/index.php?main_page=product_info&cPath=20_15&products_id=189&zenid=6bebd5830b288462d12dbebbe2910f69 mounted the panel so the door opens up. love it that way. when I wired it, I would just use a piece of wood to prop it open. haven't really opened...
  3. C

    HERMS users, how to return wort in mash tun?

    i have silicon hose laying on top of the grain bed. 90%+ efficiency with this method. In my opinion, any more complicated sparge method is overkill.
  4. C

    Arduino PID & Data Reporting Dashboard

    any updates?
  5. C

    Netduino temp sensor project

    did anything ever come out of this? I am starting a simliar project with netduino plus. any info would be appreciated. thanks!
  6. C

    Too thin mash?

    thanks guys...but i am talking about beer quality. any negatives from a thinner mash?
  7. C

    Too thin mash?

    What are the negatives for mashing in too thin? What is too thin?
  8. C

    My E-HERMS Brew Rig Thread

    MOPAR! Nice build. Where are you located? I am in Fort Mill and I just built an all electric E-HERMS brewery. Done 3 batches so far...my brew quality has skyrocketed. let me know if you are ever interested in brewing together some time. i could probably learn a thing or 2 from you...or...
  9. C

    Using a tri-clamp to attach Element

    I have the brewers hardware element adapter in my hlt and bk. Awesome
  10. C

    My E-HERMS Build - LOTS OF PICS

    Mine is 12x12x8
  11. C

    My E-HERMS Build - LOTS OF PICS

    sure: http://www.signsbannerstags.ca/ cost 2$ a tag
  12. C

    My E-HERMS Build - LOTS OF PICS

    final touch on my control panel...some tags:
  13. C

    My E-HERMS Build - LOTS OF PICS

    Wayne sscdu790
  14. C

    My E-HERMS Build - LOTS OF PICS

    Correct. One in HLT output. One in mlt output (as it leaves the mlt, before entering the herms coil) It was pretty cold here on that brew....so I think I am loosing temp through hoses and poor insulation. I've also noticed that I have to really stir after dough in. Way more than I ever...
  15. C

    My E-HERMS Build - LOTS OF PICS

    eBay. part number is in this thread some where. Had to drill out the nut. See the pics
  16. C

    My E-HERMS Build - LOTS OF PICS

    Thanks for the comments. Yes...I've been happy with the sabco thermos. Good luck with your build!!
  17. C

    Trub/Hop Filter from BrewersHardware

    Bull, sweet setup. I also live in fort mill. Got a e-herms setup with this trub filter too. We should brew together man. I'm in Baxter.
  18. C

    Water Filtration System

    Is that a regular garden hose? I was getting horrible off tastes from my garden hose. Went to a potable water hose.
  19. C

    Hairdryer in side-by-side fridge

    I use a hair dryer on low. Works awesome and runs very rarely. Controlled by a Johnson 419.
  20. C

    Pump Switches

    i used these - http://www.pioneerbreaker.com/ProductDetails.asp?ProductCode=PBC%2DSS22PMA%2DI2G%2D120V illuminated too.
Back
Top