Search results

This is a porter sitting in secondary for about a month. Used safale 05 on it Thoughts on this? Smells ok.

Sent from my iPhone using Home Brew

I bought a 6 gallon fermenter on morebeer.com for 20 bucks. Their own brand, actually holds about 6.25 gallons.

Bill, no problem. You twisted my arm. 2 full bags it is to be hidden under the bed.

I can push it to 2 to avoid controversy.

Bill, that was me. I'm squeezing a bag and a half of 2 row into my small apartment.

Great stuff Bill, thanks for organizing again.

Did I miss a link for the hop buy?

This is a phenomenal beer! Surprised there isn't more feedback. Great summer beer!

Thanks a million for setting up. Good to meet everyone and some great beers.

Sent via PayPal earlier. Thanks a lot for organizing.

Poured the first pint from the keg ahead of paddy's day. Very good. Won't last long.

I got some whiteboard at Joanne's fabric for under 10 bucks and cut it down to size.

I just did my 3rd all grain batch at the weekend. An Irish red with target o.g of 1.044. I ended up at 1.038. I had too much water. Could I still throw some malt extract in the fermenter to kick it up bit? It's in the fermenter 3 days now. Any suggestions.

What did you use to cut the white board? Sorry about all the questions. I'm light on tools in my apt.

Very neat job. It's not totally clear from the pic. Did you use the dremel to cut the frame the out also?

I'm assembling my kegerator now and am thru most of the hard stuff. Want to run my beer lines thru some copper tubing. The tubing is already attached to the tower. My question is how do I get the tubing thru the copper pipes. Either disconnect at the tower but would need to get a new wrench or...

Just got one myself and is sitting in the box at home ready to start on this weekend. Will check tonight to see if that is the case on all the new ones.

Thanks for the tips guys, plenty of options to ponder.

Just built myself a wort chiller and now I can't figure how to connect to my faucet. I have one of those pull out spray faucets. Which I'm able to remove ok. But I can't seem to find a hose barb that will connect to the female thread. I've tried the 1/4 MIP which is too small and the 3/8 Mip is...