Search results

I'm in

I'm in

I'm in

Thanks for the info. I had been relying on the near boiling liquid to sanitize the hoses, pump and plate chiller after the boil. For my last batch I wanted to be try recirculating during the boil, to be more on the safe side that everything is sanitized. Next time I'll recirculate after I...

For the boil kettle the pickup tube draws from the side of the keg's bottom. This is the one where I am having most problems since I am trying to recirculate to sanitize the tubing, plate chiller and pump. The HLT draws from the bottom center. It also has some problems when transfer boiling...

March 809HS-PL Pump

Whenever I try to pump water or wort when it is boiling there is cavitation. I have tried pumping the liquid well before it reaches boiling, but as soon as it is boiling the problem starts. I have tried reducing the flow after the pump but this hasn't helped. Is there any way to prevent this?

Here is the finished panel. I really liked The Electric Brewery's design. Thanks Kal, P-J and icebob for the help and inspiration to complete this.

I'm in

yeah, already did, worked fine And thanks for going over this, just saved me $68

Ok, changed it and the power button is operating as expected. Thanks again

Actually after checking my order again I ordered the correct switches. Now I am confused why pin 14 stays on, since the diagram for SW1 saws they are both NO.

The SW1 switch (the correct one in the diagram) is both NO. The SW11 switch (the one I installed) pin 24 is NO, pin 14 NC. Using SW1 will turn power on for everything, then turn everything off when pressed again. I think that is the problem I am having.

Yes, i ordered the correct switches, will replace them when they arrive.

I checked Auber Instruments site and I had ordered SW11, not SW1 switches. I also programmed the timer so it is sounding the alarm when it finishes countdown, not while it counts down. Thanks again for your help.

I am also confused about the purpose of the power button. Right now I am able to use everything with the power button off except the element switch. Is this correct?

I am a bit confused about how to wire the selector switches for the two alarms. In the diagram I have 11 go to 1 on the switch, and 12 in the diagram go to 2 on the switch. This causes the alarm to sound as the timer is counting down.

I used the diagram here, https://www.homebrewtalk.com/f170/help-wiring-120v-1500w-element-control-pumps-2-pumps-421877/index2.html#post5429072 not sure what the source of the first post is, I thought it was the final draft But I was mistaken. I do need help wiring the SW2 selector switches...

Connected everything the way it should have been connected in the schematic above. Everything seems to work. I had saved all version of the schematic that I had, assumed the newest one was the up-to-date one. I was wrong. Thanks for you help!

DAMN! used wrong schematic, this was the updated one