Search results

jessie

Cadibrewer, same results again on the pi. maybe something I did wrong soldering the GPIO pins? Tho only other issue I was I had to load all the Arduino-setup info line by line in LXterminal using sudo cd -f to get things to create etc. maybe in the setup somewhere it went off? Binary sketch...

any tips on how to get the alamode board into the list of board to upload to in the arduino ide software for windows?

thank you Trying it! any tips on how to get the alamode board into the list of board to upload to in the arduino ide software for windows?

ok, so the only ports on the alamode is the micro sd card reader and the micro usb port that I power it with. So use the micro usb port to usb on my pc?

I;m using the alamode, im not sure how to connect that to a PC. As it sits on the GPIO of the PI. I may have a hardware issue.. ? Maybe someone here has seen this before?

The upload to the alamode is what I'm trying to do. I did do all the chmod permissions to the original /var/www/html earlier no issues there. Looks like --- java.io.IOException: Cannot run program "/usr/share/arduino/hardware/tools/avrdude": error=13, Permission denied ---- has permission...

Hi, I'm looking for more assistance, Not sure why im not able to upload the Raspberrypints.ino file with out errors. this is what I get from output on the bottom of the screen after done uploading (see Below). I am able to select alamode and I do have the serial board checked at /dev/ttyso. I...

Thank you so much, I’m super new to this. I appreciate your help!

Thank you Day_tripper and by the other edge of the board do you mean the right edge on the GPIO? I assume as there are a lot of pins there for many meters. Any clues to how those are numbered if bottom left was 1 then 2 is right or up?

Thanks is advance for you answers. Maybe these images will get some results. I'm hooking up flow meters sf800 to the alamode/raspberryPI (raspberryPINTS v2). I'm very new at this and think I'm close to the last steps here. On the alamode board does this look like the correct placement for the...

Thanks is advance for you answers. Maybe these images will get some results. I'm hooking up flow meters sf800 to the alamode/raspberryPI (raspberryPINTS v2). I'm very new at this and think I'm close to the last steps here. On the alamode board does this look like the correct placement for the...

Thanks, It might help. I'm using the Alamode board. So ill see if that coincides with my options.

Well I got pretty far in the flow meter setup with all the work arounds and etc. I'm an amateur at this point, But im not sure on where to install the flow meters. I have 5 and I'm supposed to put them in pins 8-12. The meters have 3 female hookups 1 red 2 grey. See image below I was able to get...

Anyone up an running with flow meters on RaspberryPints 2., accessing their GUI from another terminal? what are the refresh rates for pours? or any tips? I'm adding flow meters to my Pi and accessing the page though a different computer not sure if that's a good idea.

Hi, Is anyone out there using Rpints with flow meters accessing their Rpints page through another computer on their network? If so I'm wondering how often the flow meter/pour will update to the client computer accessing the page via browser? or how to get it to refresh Tap list page after each...