Search results

Hi All, I just wanna promote my free fermentation logger there is a DIY Platto, or just an "outside of fermenter" alternative till iSpindel/Tilt. I posted about it before, but now I guess it is now final. If anyone wish to test and be a beta tester, then please let me know. iBLOPPER – iot...

8th (XXL petling): Brewfather

7th brew (XXL petling): Brewfather

5th Bubble Logger SPINDEL + CONNECT brew running (www.bubble-logger.com): https://share.brewfather.app/rVxhkgEiG8qDrw

what I do is boil the water, as it removes some oxegyn and sterilize. I let it fail till 70´C as this do not give bitterness then, and hence only exttract aroma. So you can say this hop tea used though the bottling is an advance dry hopping more than a common hop tea. It is true the falling of...

Hi there, to bottle NEIPAs you need to ensure no oxidation. hence: Only primary fermenter, no secondary. No additions later than 75% complete to ensure the yeast remove oxygen. Use sugar cubes directly when bottling, no sugar dilutions. Use a very small bottle-siphon-wand, ensure to...

4th brew using the TILT/Ispindel alternative is running: https://share.brewfather.app/TFc2jJNWAKxzaR

READ MORE at www.bubble-logger.com

BTW......this have been updated a bit till v1.2 and most issues has been removed!

rsquared, thnaks! should be corrrected till: https://github.com/kbaggen/Sound-Bubble-Logger-and-Temperature-controller-for-TILT

.........and currently I am fermenting this brew: https://share.brewfather.app/tw8JHnLhdYDnj5

Dear All, from my Bubble-logger project I have created the "SBL4TILT" project there is combined TILT repeater, but also a temperature controller and hence make use of the repeated TILT temperature to control a 2-channel relay. Furthermore, it logs airlock bubbles by digital sound sensor and...

Dear All, lastes run is on: https://industrial.ubidots.com/app/dashboards/public/dashboard/L_C6nHjPRmuJGg14DrfrSKe4oXY I dry hoped it yesterday around 14.30, and a nice top is showen as the CO2 got released!

#8 Muchacho, some nice equipment there....cost a fortune over here! If I understand your setup, you let the bubles go into a tube there is placed in the blow-off? I either have sensor directly on tank and try control the fermentation rate by cooling, or use a blow-out as shown if I know the...

BTw.....if anyone wish to see how it looks at Ubidots: Yoga Pils: https://industrial.ubidots.com/app/dashboards/public/dashboard/L_C6nHjPRmuJGg14DrfrSKe4oXY?datePicker=true You, likely have to select the dates till "last 30 days"!

#2, the idea can be amendend to a tube making bubles in a blow-out by letting the mirc hang freely. But it changes the behaviour completly, and hence, all polynoimal/data change. So you need to make use of S-airlock, sorry :) If you look at github, you see one picture of my setup, and I sometime...

Dear All, (https://github.com/kbaggen/Cheapfathers-Bubble-Logger) I have worked a bit more on my fermentation Logger/controller, measuring "Temperature and Sound detection of CO2 bubbles" for NodeMCU (ESP8266). The software give an indicative SG estrimate based on S-airlock is used with a...

Dear all, (sorry for the use of real metric numbering :) was looking a bit on this concept of hop mashing and meerly from the point of re-using the big amount of "wasted hops" from a former NEIPA. I normally use 200g hops in my 20L NEIPA as a hostand (80´C of 30-45min) and also 250g for dry...

Hi there, ressurecting this tread a bit, as also I tried to venture down this way of CO2 bubble dection as a mean to calcualte SG! Code/description on: https://github.com/kbaggen/Cheapfathers-Bubble-Logger I used a cheap adriuno microphone to measue the big "blop" comming from airlock, but...

Hi again and especially Mucgancho, I guess I a bit have a come to same conclusion that every time I think I had got the hang of it, it twist, and number goes off! Hence, the statement of above and also what I hear from PLAATO users is the use of bubbles is so hard to turn into a usefull SG...