Search results

Hi guys, Has anyone carbed their beer with multimix gas (70% nitro/30% Co2) and then bottled that beer using a CPBF? Want to give this a try.

Try a new USb cable also. It was what fixed my issues after months of intermittent failures.

Welcome to the club..lol. Have you checked the log file to see if there are any clues?

Well after months of ongoing issues it turns out my intermittent ongoing problems registering pours was a second faulty Usb cable. I had tried two different cables but recently tried a third cable with another PI and it seemed to work. so I went back to the original pi but with the new cable and...

Ah ok thanks, I have Brewery images turned off but not beer images.

Hi guys. Anyone know how to remove this gap in my beer names so they are to the left? I know ive had it setup right before but can't remember how I did it?

But how do I back up when I can't access the GUI to use sd card copier? EDIT- I ran this..It appears I already have Buster. I don't know how as I installed this awhile ago now. And I had to update python the other day before updating fermentrack. pi@raspberrypi:~ $ cat /etc/os-release...

Is there a way to back up my fermentrack settings though before upgrading to Buster? I assume I will lose fermentrack and have to reinstall it?

Yeah I will do this. RPI zeros are around $30 here so I should buy one set it all up copying the calibration settings etc from the existing fermentrack install. Cheers.

My fermentrack is working fine and I can access it from any web browser in my wifi network. I upgraded Python and fermentrack to the latest version and had no issues. (Sorry if I wasnt clear) I was more so talking about upgrading to buster. However given that its working fine should I leave it...

No, fermentrack and Rpints are running on 2 different RPis. I have cloned my Rpints sd card before and will do it again as soon as I get some new sd cards. The fermentrack PI isn't booting to the GUI, its booting to a commanline prompt (If thats what its called) Where it asks for my username...

I think your getting my Raspberry Pints issues mixed up with my fermentrack. I don't have any issues with fermentrack other than updating python last night which worked well but just took awhile. I don't want to have to re calibrate everything for the Ispindel, setup the empty controls again...

But I don't already have buster installed. I want to back up my Fermentrack install, then install buster and then re install fermentrack with all of my settings etc intact? EDIT- I also tried logging into the Pis desktop but it booted to a raspberry pi log in. I entered the details but it just...

Can I upgrade to buster now? And I so will I have to install Fermentrack from the start again? Also how would I back up my install of Fermentrack in case I do have to reinstall it? Thanks again.

How long should it take? Ive got this far and its just siting there for almost an hour. WARNING: You are using pip version 19.1.1, however version 20.1.1 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Looking in indexes: https://pypi.org/simple...

Actually Im running that now. Had to run it once to update then run it again to install Python 3.7.I hope Im doing it right but it seems to be running ok. After I run that will ferment rack then load again when I re start it? Do I have to change any settings again?

Hi guys, I tried to update fermentrack today and after about 10 minutes did a refresh and now it won't load. I then rebooted the PI and it still won't load. I get a 502 bad gateway error. Any suggestions??

Ok so after playing around a bit I now have ACM0 and TTYS1 and TTYS0. I uploaded the sketch and it worked. But no pours are showing, and Im back to these errors again. 2020-06-07 07:21:21 RPINTS: valve update: RPU:VALVE:0=0 2020-06-07 07:21:21 RPINTS: valve update: RPU:VALVE:1=0 2020-06-07...

My SD card crapped out today so I had to reinstall everything as I had wiped my back up testing another RPI. Anyway Im 99% sure I chose to use USB for the serial connection during the install but now when I try to upload the Sketch it says Serial Port /dev/ttyACM1 not found. Before a reboot I...

The glasses is the number of standard drinks the beer ABV is. so 2 glasses is 2 times the standard drinks. So you could only have 1 (Assuming your .05 in the US like we are in Australia.)