Search results

Awesome! Thanks vendors and HBT!! - SoloGMan

Asked same question a while back. Yes you will need to cut the case. (see posts 98 & 99 above) - SoloGMan

Many thanks P-J! Not only for your answer, but your diagrams and other guidance in these threads. Thanks again to Russki for putting your build up here! I can't wait to get this all set up and crank out a batch! I may have one or two other questions along the way, hope it's ok to put them...

Great thread, thanks for posting your build! I'm starting a similar build and have a quick question, for Russki or anyone else willing to help. When mounting the SSR's to the enclosure, do you: 1) Cut the enclosure in order to mount SSR's to the heatsink, then bolt heatsink to enclosure or...

I read the towel and did some digging. The character is Bari San...the city mascot for Imabari in Ehime. Apparently city mascots are big now? http://www.japantrends.com/yuru-kyara-mascot-character-local-region-promote-pr-camapign/

You could try the DIY controller from Still Dragon. http://www.stilldragon.com/diy-controller.html You get all the parts you need, minus wire, and you get to build it yourself. It gives you basic, stove-knob type control over heating element. I've built and used one. Nothing fancy, but it...

Here are are some pics of mine.

I recently got and built this controller. It is perfect for my simple ebiab needs. To confirm...Yep, it's a 40amp ssvr. Yes, ground the rheostat, using the 4th tab that is off center from other 3 tabs. As for extra wire on your 240v set up, I believe you'd just cap it as a previous post...

Thanks HBT'ers! Grabbed a 50' roll of 1/2"od tubing for $21 in North Bay, CA! Yellow Tag said it was $50, down from $75, but it was only $21 at checkout!!! Wooooohooooo!!

I second Pisgah brewery and Wicked Weed. Also, if ur in for mood for pizza, try Mellow Mushroom. They have decent pies and a great draft /bottle selection. (had to plug it, used to throw pies there back in the day)

Just confirming...I used a cheapo harbor freight step bit, slow and steady with lubricating oil. The hole size was 1.25" and is a very snug fit for my single foldback element....nearly had to screw the element into the kettle. If you have a ripple element you'll may need a bigger hole, maybe...

Yes please!!

Bobby, In the video you show an economy "miniature element enclosure" that screws onto the pot using a lock nut and tephlon tape (at about 5 minutes). I may be jumping the gun, but is this element enclosure available on your website? I only see the enclosure with TC Clamp. Thanks!

Would be interested in the weldless! Subd!

Hi all, This is what I'm referring to: http://www.homedepot.com/p/t/203439004?productId=203439004&storeId=10051&langId=-1&catalogId=10053&PID=806314&cm_mmc=CJ-_-806314-_-10368321&SID=C5B1L3BR2S34225-2013-07-02-12-12-p-134155&AID=10368321&cj=true#specifications No floor model at the home...

Awesome prizes....please count me in!!!