Search results

Update: So 2 weeks have fully passed and i measured gravity again : 1.022 It dropped a little, but not much and seems still rather high . Initial gravity was 1.070 so that gives around 6.3% ABV, which sounds low for a 8% target beer. Will keep it in the primary for another week and retest...

With a mash tun i can easily drain the wort to the boiler, making sure its clear. If using the boiler to do the mash...i have no way to remove the grain (unless i use nylon or muslin bags). Goal is to mash the grain with no bags, and obtaining a clear wort in the end of the mash. Do you...

Hi all, I decided to "upgrade" to doing All Grain batches, from Kit malt extract. I will probably build my own mash tun from a cooler box, and then transfer the wort to the boiler for adding the sugars and hops. I am planning to buy an Electric Boiler, as i dont have the space or means to...

Well, in fact my secondary is even bigger. My kit consist of two 30L buckets plus this 23L fermentor where the beer is now. I was planning to move it to one of the 30L buckets this weekend, do you recommend to keep it where it is until bottling ? If so, is this because of too much air in...

By the way, this is what it looks now....kinda messy ? It sure looks cloudy and brownish from halfway to the bottom... https://farm2.staticflickr.com/1450/24285408702_317c2e0677_k.jpg

What i find "odd" is that all Brewferm kit beers say 1 week fermentation plus 2 weeks in secondary... But each beer its different... My previous kit beer was Brewferm Diabolo and that started at 1.071 and in only 7 days was at 1.014. It now sits in the secondary bucket, will bottle it...

Hi all, First post, and second time brewing, so really really young in the circle. I would appreciate some advice, as i read a lot about this but not within my particular parameters. I started a Brewferm Abdij kit last week and added 500g of Light Muntons Malt Exctract instead of the 500g...