Search results

Have you tried searching through the IPA recipes? https://www.homebrewtalk.com/f69/

Thanks!! Tastes awesome. I subbed northern brewer 60 min and target 30 & 15 hops because my home brew store didn't have your hops. Blew the lid off even with a blow off tube. Here's what the bottom of the lid looked like. Swapped in airlock after 2 weeks. OG 1.088 and FG 1.020 with S-04 yeast.

Home Depot has a ryobi table saw for $129 that would do the trick for this. The. You can use it to build your grain mill stand and hopper and many other things you never knew you wanted to build. Lol. http://m.homedepot.com/p/Ryobi-15-Amp-10-in-Table-Saw-RTS10/202517808/

I'm in Toledo. How far is that? You can use my table saw, circ saw, or mitre box :)

Why not use a table saw? Especially on wider lumber like that, a mitre box won't make as perfect of a cut unless you have a compound mitre box. Which you are now getting into a much higher price range. I say use a table saw instead. I bet it wouldn't take more than asking 3 people to find...

SMASHBURSTED IPA 2-row & cascade. I can get a lb of cascade for $13 so this ends up being a relatively cheap brew despite 8 oz of hops. 70% efficiency = about 7% and 52 ibu's so it's very drinkable. 15 lbs 2-row 3 oz @ 20 min 2 oz @ 10 min 1 oz @ 5 min 2 oz @ 2 min Wyeast 1056 3 week...

Put me next inline.

Still available? I'm interested.

Next inline for co2 and splitter. And maybe both. Just let me know if I get the chance to buy them both.

Never had a problem on my iPhone. 25+ brews so far. I've even had my battery die and when I charged it and it came back on a few minutes later, it was right on schedule.

Do the bends in the gauges affect the needles? Not too worried about the one that says how much is left in the tank, more the 0-50 psi gauge.

Since you're using a bucket, just go to Home Depot or any other hardware store and buy a nylon paint strainer. Sanitize it and then you can dump your wort into your primary as usual after chilling. Then lift the strainer bag out and Viola, no extra junk in the fermenter. You'll have to...

I use the bottle filler wand like you would use on a spigot. It fits perfectly in the picnic tap. Just vent the keg then turn the pressure to a couple psi and fill each bottle until the very top. Leaves the perfect amount of space in the bottle and you lose very little co2 if any at that low...

Do the non-carbonated ones have any little bit of bubbles or is it still exactly like when you bottled them? It may be that some are not ready yet, the sugar didn't mix properly in the bottling bucket. Describe your bottling day and what temp they say at and for how long. Is there the same...

I know it's far away, but if you ever drive to Toledo OH I have 2 to trade.

Used mine last night and cooled my wort to pitching temp in 10 min. I do full boils in a 30 qt pot and the wort chiller fits perfectly.

I'm open to any trade too.

It has 1' of tubing (didn't work as planned so I shortened it to a couple inches instead of 1' like pick shows) on the output and 19' with a garden hose attachment that I figured could be uses as a Pre-chiller. Brand new never used. I made 2 out of some copper tubing I scored on Craigslist and...

Measure 5 gallons of water then pour it in the keg and mark your keg. You could pour in and mark one gallon or even a half gallon at a time and mark it.

Have you tried moving the pin when the gas is leaking out? Sometime the poppet is a little off when you disconnect the gas connection. Try moving it with your finger. Usually you can see which way it needs to move in order to seal. If that doesn't work, replace the poppet. They're cheap