Search results

Thanks for the replies.

found some used perlicks for sale. is there any marking or designation on the faucet to determine if stainless or chrome plated? thanks in advance jbrown57

Quote: Originally Posted by doug293cz View Post The 34% fill is NOT correct. If you understand the chart below, then you will know why it is not correct. At 0°F, the fill level is about 65% and at 70°F it is about 85%. Brew on You are reading the chart entirely wrongly............. This is a...

IF the 34% fill level is correct you could raise the valve end ~2" higher than bottom and be fine with the tank in a mostly horizontal position.

The post in the picture with the red oring may be a liquid post with an adapter of some sort screwed into it. It just appears at first glance to be grooved as a gas ring, or I could be wrong. really hard to tell in the photo jbrown57

I second the vision $500 with ss stand casters and 2 level ss grill and heavy duty cover. about 15 min to fire it up. check at cosco or sams you will not be disappointed. jbrown

Something to check before you buy a lid assist of any kind, many of the older freezer hinges can be adjusted to increase the tension by rotating one half of the body clockwise tightening the internal spring. Not to sure about the newer ones. Not a huge improvement but might be enough if your...

It would be interesting to place a temp controller on the ferm chamber and control the fan based on temp.

380 SW bodyguard, with +P Gold dots.

Mechanical engineer Design and build high speed rotary cappers and associated equipment. Jbrown

Sorry, thought you were talking about sight glass for wort level Jbrown

If I understand correctly you are thinking of piping the sight glass in the same line as the pump inlet. My experience is that it will work only if you seal off the top of the sight glass before you start the pump. The pump will draw air thru the sight glass and capitate the pump causing loss...