Search results

Tiltbridge in double-duty-action! Red-X malt by BestMalz, experimental lager on left, Kolsch on right Two Tilts being logged on the Bridge, black and pink. Working great! Now I can see my gravity's, anywhere I have a computer or phone to log onto my router. Thanks @Thorrak

Who "says" underpitching WLP-029 Kolsch, is bad? I didn't have time to step up the one 40 Ml PurePitch (not the newer "next generation" package), and accidently bought WLP-840 Am Lager, as the "second" yeast pack I was to pitch with no starter... So I did a last second "step up" using about 400...

I used Brewflasher. Just to be clear, I am not 100% sure that I "found" the QR code on the Tiltbridge user interface homepage..... I have the Tiltbridge working now very well with two Tilts, and I was just "playing around" and adding another board ESP to the App, just for *****-n-giggles...

I did have the V1.1.1 OLED flashed, so I just reflashed with the V1.2.1 and get the same GUI When you open the Tiltbridge App on your Android phone, there is a "+" sign to add another Tilt to this app, and in the past, I just scanned the QR code that I found on your Tiltbridge GUI homepage...

I see the "usual" GUI, but I am sure I am not cracking up, and I did get the QR code somewhere here, on the past 2 boards I linked to the App.... I was not drinking at the time! I promise!!

I just got a BIG upset, on the real water Profile of Koln Germany. I thought it was very soft and used distilled water in the past for the Mash and half of the sparge.... BUT in the most recent issue of Craft Beer and Brewing magazine, Spring 2023 issue, page 60 - "Defend Kolsch", the article...

Maybe my "wording" is messed up, since I am not up to speed on all this programming language... I am just trying to get the new naked board (OLED build with no screen) to migrate the ESP32 readings into the App. I got my two Tilts running good in the App together from the past two boards (with...

If I am not mistaking, the other 2 ESP32's, that I linked into the Android App, I found the QR code in the Settings tab, once you log into your given IP address for the new Brewflasher loaded board. But this time with a new naked board (no screen), I can not find that QR code anywhere to scan...

I only see @ "UncleD" in your reply???

Where do you find the QR code so I can scan it and add to my Android Tiltbridge app? I was able to find this in the Settings in the past , from the ESP32 assigned IP addresses, but can not find this one? Am I cracking up? I can manually add the GUID, but not sure if this is the MAC address my...

Never heard of Mangrove Jack yeast ?? This M54 lager yeast almost sounds like the very clean Saflager 34/70 that also can work at 64- 65F without any Ale-like off flavors Let us know how it tastes after you get it done, and lagered a little.

I know this is old thread, but do you still use this malt? I just bought it and brewed a 100% Red X with Saflager 34/70 and 29 total IBU Perle hops. Fantastic tasting beer - Bready, malty but not sweat. I used the 34/70 so not to "hide" any traits of the malt, Question - I wanted to use this...

This conversation needs to be moved off of this Forum! Kegland started this...... I would like to "see" a computer run spunding valve..... LOL Sorry @kbaggen

Now I see... NO TFT and no OLED screens. Please note your above Post #1, when you go to your Documents page link, it shows "ESP32 Supported -" this - HiLetgo ESP32 OLED WiFi Kit V3 Type-C ESP-32 0.96 Inch Blue OLED (@Frank Nobrega for TILT testing)). And when you go to Amazon and type this...

I probably have a board that is not tested, and why I have nothing on the screen. I also can not connect to my home router with the correct SSID and Password. I do get a "Saved" message in green color after entering my ssid and password, but the ESP shows it is not connected to my router. I...

I am using an ESP32 OLED board. I used Brewflasher to flash it. But the screen is just black, nothing on it. I do see when searching for the WiFi signal from the board - SPINDELMATE CONNECT 1390####, but when I go to your cloud logging home page, all I see is this -

YES! I am just now setting up my first Spindelmate, and I am stuck trying to figure out how I can find my 8 chipher iBLOPPER number (e.g."10278845") as username!..... I am on Spindelmates, cloud login - ILTPILLHUB I know this is not your project, and I did ask this question on that Forum, and...

I am just now setting up my first Spindelmate, and I am stuck trying to figure out how I can find my 8 chipher iBLOPPER number (e.g."10278845") as username!..... I am on a Windows desktop now, and used Brewflasher to flash the ESP32 and got this message, so I assume it is now properly flashed -...

"Select Sensor Type" - Manual, Tilt, or iSpindel What is a Manual sensor? Would this choice (manual) for setting up a specific gravity work for the Pill ? I know this is a "sore subject", but just asking before I go and build a SPINDELMATE. The Tiltbridge is working fantastic, with my older Tilt !

I was not sure if I should leave a "comment" on github or here, so here - Just to clarify the Issue, display the fermenting beer Name on the All Devices page. The name is already on the dashboards. Thanks for responding!