Search results

Can you corroborate this paper you came across ?....... ;)

Know any metal workers, specifically some aircraft sheetmetal types? They could be riveted on, with some stainless solid rivets. They swell and seal, no O-rings or the like per your concerns. 1/8 dia. rivets would hold the latches from now on.

How was it stored after the last use, ( besides "wet", is my guess...)?

Me, I'd go electric for the convenience and controllability.....And no open flame. ;)

(In case a rock get's in there.....)

Probably O K to use. You can try to knock it out, ( it will depend on your skill level). You probably paid some decent bucks for the setup, so shouldn't you have a dent free piece?..........Grainfather is waiting to hear from you........ How's that for some no advice?.......;)

Not a clue on the stability question..........I use it in a modified dishwasher, and add separately...........The two compartments in the door........One looks about 70%, the other about 30%, were you to look @ the whole mass of product.;)

I use "Family Dollar" Oxy stain remover". Check the "Dollar Store" in your 'hood, they should offer similar. I prefer unscented, But I hear people say it doesn't matter........To them. :D Yes, from "Family Dollar" stores. "

I use "Family Dollar" Oxy stain remover........Same ratio,( 70%-30%). That's the brand I've used for 3 plus years now.

What he said. You don't need crazy tension belt wise on the bushings, ( or bearings for that matter!).

To maintain the temp of........Whatever you're heating up........Mash,still, bathwater, hot tub, etc........... Watch your temp gauge, if ya' have one......Temp low, add some coals. Temp high, rake some out. ;)

If you're on FB, you can find that the commercial, and breweries that I mentioned, have their on pages on there, and that would get the proper response in regards to tours.

Sent you a "conversation" thingy.

3 bags of charcoal. Build a separate fire with the charcoal, and shovel it under the kettle as needed to maintain temp. Bricks or cinder blocks, or a car wheel trimmed for charcoal access and airflow, will support a kettle.

Buy yourself a Pilsener @ any local Tienda, and enjoy it for what it is. I hear it's not a lot different @ the brewery.......:D That said, ( and don't shoot me!), a Budweiser that is brewed in Guayaquil is worlds apart from their product Stateside! In Quito, my favorite is Two Barrel Brewing...

@odorf Elaborate on "keyway flanges", Please.

@JohnDBrewer https://www.mcmaster.com/#edge-guards/=1ddpqsw Some examples of what's available.

On your 3 roller.........Were there any setup pains to make it function well? For example, any problems noted whilst bolting it down or the like, throwing the roller alignment out, etc....? I ask because I have an Ecuadoran friend with a 3 roller Monster Mill, and he's mentioned some setup...

Grain mill spotted at a homebrewers house, during a recent visit to the Czech Republic. Throw in it what you will!

Methinks, getting a bond to the Stainless, will require Silver solder......... I could be mistaken.