Search results

Having trouble with my tilt and fermentrack. My tilt and Fermentrack have been working fine for almost a year. Last brew I noticed my gravity's were way off. it was showing the starting gravity at .085. I checked my phone tilt app and it showed the correct 1.052 gravity. I tried putting new...

Yes by taking out the gravity sensor temp from the graph it goes back to 10 degree intervals Thanks for the temporary fix. Does this have something to do with the tilt. Can I reset the tilt or something to clear the outlier temp?

I have been using fermentrack for a few beer now. I received and installed a Tilt Hydrometer. Since doing this the temperature axis now reads in 100 f intervals. Before installing the tilt my set interval was 5 F It is very difficult to pinch/expand on my phone to get a more precise reading. How...

There is a video tutorial on the tilt website showing how to do multi point calibration. Basically you just make a sugar/water mix to the gravity you want and then enter those numbers into the tilt app. Did you use the same brand of controller the second go around and which controller did you...

Yes I did hold the boot button the entire time as I was flashing via fermentrack not esptools. I was not able to see any progress using the Fermentrack direct flashing function until the process was completed. This seems to be a major issue for several of us. THORAX any thoughts on what is...

Either I am doing something wrong ( probably) or I have gotten 2 bad boards ( different MFG the second is the hiletgo from Amazon). Once again after a successful flash via fermentrack( had to hold down the boot button) I have lost my LED screen. After the flash ( at this point I still have the...

Did you have to hold the boot button while flashing to get a connection on the new Amazon ordered board?

Strike 2 or 3 depending on which brand others have ordered. I also ordered the ESP32 OLED Wemos WiFi Module+ Bluetooth Dual ESP-32 ESP-32S ESP8266 OLED For Arduino from AliExpress ( the second link on the tiltbridge wedsite). I had the same problems. Could not flash then had a successful...

Being a novice I was unsure how to go about flashing the new device. I thought there was an instruction that said to unplug other devices to keep from flashing them incorrectly. I guess I need to re-flash my uno to get it up and running again then try flashing the ESP32 with the uno still...

Thorak thank you for the info regarding powering the ESP32 off my raspberry usb port. I do have a new issue that I hope you can help with. I have been running fermentrack for several brews now with no issues it has been a pleasure. I received a tilt hydrometer and wanted to setup the tilt...

Can I also run a regular USB to micro USB from my Raspberry to power the ESP32? I would rather not use an additional wall socket to power the esp32.

Put me down for 4 . 2 glass and 2 herculometers . The first herculometer was not technically broken but the paper scale would not stay in place so I always had to tap either the bottom or top of the hydro to get the paper in the right place. Second herculometer the black cap on the end came of...

Figured out what is was doing wrong above. Never put a number in when switching modes. Now all is setup all pins configured and seems to be working.

Can anyone help with the error. New installation . Had problems in brewpi with beer temp probe. I assume that is what is causing this TypeError at /devices/1/temp_control/ float() argument must be a string or a number, not 'NoneType' Request Method: POST Request URL...

Kal Thank you for the quick response. Two questions 1. What do I do with the link - sorry very limited programming experience. Once I down load the file how do I insert it into my PI? Will I have to do anything else or will this just incorporate into my current program/application? 2. New...

Hope you can help. I am trying to calibrate my temp probes per the instructions listed above. I am running a legacy version not the spark. I can install screen but when I put the command screen /dev/ttyACM0 57600 i get a message device or resource is busy. I have stopped the script running...

Thanks for the info. I am looking forward to using this product into more of my brewing activities.

I recently purchased a bottle of the San Step. I was interested in using it in my automated bottle washer. The two big concerns I had were the need to let it air dry and contact time of 2 minutes. With Star San I can usually just put a gallon in my carboy shake it for 30 seconds and I am good...

I am in the process of ordering but from the best of my measuring ability the McMaster Carr product number is 4061T157 Dash 111. Square Buna-N $10 for 100 plus shipping or pickup if local. I'll report back. I am told this is also the same part number for Taperite permanent pipe nipple.

All 4 of mine have the o-ring ( as in Amadeo38 pic) and yes the usually stay wedged into the tap body but when cleaning they sometimes fall out. I do not want to buy a whole replacement packet and was hoping to get just a few of that exact piece. If anyone get's the measurements and or a part...