Search results

What package type do I use for the Microchip 24LC512s on the teensynet board? There are four types available for samples. I am still working on a solution for using OpenWRT on the WR703N router.

I put dd-wrt firmware on any router I buy, and make it one of the requirements when I buy routers. The TL-WR703N has firmware available from dd-wrt. I plan on burning that firmware rather than the TL-MR3020 replacement firmware replacement that Jimmayhugh has posted on his teensynet website. The...

Jim, I have been following your teensypi project almost from the beginning, and anticipated the switch to the teensynet. I've got the RPI, WIZ820io, the teensy 3.1, the teensynet v5.2 board, and the TL-WR70N, combo action board, and the RGB LCDs and boards. I need to get this on my rig and...

I looked around further, and at http://www.practicalarduino.com/projects/water-tank-depth-sensor, there is a circuit schematic, source code and listings of different chips.

the brewtroller site (https://www.oscsys.com/projects/brewtroller/system-design/volume-measurement) hows a schematic for a volume measurement using a bubbler system using an aquarium pump. It does not state what sensor is used, but does describe the theory. It appears it could be easily adapted...

A pressure sensor would be an excellent addition to the teensypi project for brewing on a HLT and boil kettle.

Jimmayhugh, I also have to say that finishing the teensypi for brewing purposes is what I have been working on for a few months now. I have taken alot of ideas from the various DIY forums here, most notably forums on weldless builds, building detachable ss probes, the electric brewery site, and...

I read the Zymurgy article by BrewGyver, and within a week decided I was going for an automated brew stand. I struggled a bit with the directions, being uneducated in the fabrication of things. After scratching my head a bit, I got it built. I have just fabricated the propane gas manifold from...

Yes, That's the one. What is the advantage of using 3v3 to 5v level-shifter circuits rather than the 3v3 regulator? I am waiting for that board to arrive to start playing, rather than soldering wires on to the Adafruit Pi Plate board.

Great work here, and at your TeensiPi website! Most of your boards have been labeled with the components, bu do you have a list of components for the Adafruit Pi plate replacement board you created? Thanks.