Search results

I now have 2 keggles with ball valve's. $125.00 a piece or both for $225.0

Price drop to $130.00

Bump

Got an extra 15.5 gallon Sanke keg thats converted to a kettle. I built 3 keggles but need to free up some extra cash for more parts so selling off 1 keggle that has never been used. Water test and NO LEAKS! ball valve included attached with stainless weldless bulkhead from bargain fittings...

Wanting to plant some more hops and this is the best place for direct sunlight. It is next to my driveway and approximately 14-16 inches wide. Is this enough room. Plan is to grow them straight up about 8 feet and then over then driveway upwards. they would be growing towards the South which...

Yes control through valve leaving pump. I'm almost positive your not letting your grain bed settle. Although like previous poster mentioned watch the return wort for channeling...I'm ghetto and place a piece of tin foil with slits in it on top of my grain bed.

How fast are recirculated? I recirculate for the last 45 min of mash and while bringing temp up for sparge. I am direct fire with a keggle. you definitely have a problem somewhere as recirculating should help clear the wort. After mashing in I let everything sit for 15 min before starting...

Wouldn't work for HLT as it would eventually stick up above you water level during sparge

Buy a barley crusher + buy base grains in bulk = save money. Barley crusher paid for itself after (3) 50 pound bags of 2-row. Plus my efficiency increased 10%!

Thanks, looks like I will just buy a PID from Auber. Was hoping these free ones would work

Any one know if that Omron would have manual mode for boil

I have the "d" model which appears to be electromechanical output only :(

The model I have appears to only have electromechanical output :(

Using it for maintaining HLT temp with herms (eventually) and BK once sparge is complete. Don't think the watlow has DC output?

Will be doing 5 and 10 gallon batches with a 4500watt element

I plan on hooking this up to a ssr, just need to know if the Omron can run manual mode? Make sense? I am green at this

With the element running at 100% would have hard time with boil overs and have a lot of boil off

Want to throttle the heating element back to say 70-80% for the boil.

Thanks for the reply... Would the omron have manual mode for the boil? I have the manual but am dumb at this stuff

Any of use a watlow or omron temp controller instead of a pid. I have acces to both of these models for free and want to know if I can use them ?