Search results

CO2 recovery?

I can just see someone jumping into his SUV and speeding off!

Very nice rig!

Tried Removing the controller from Fermentrack, re-flashed the controller, set it up again, reset eprom, power cycled, tried to set pins again and it failed again. Here's the err log: Mar 14 2022 04:29:00 Refreshing dbConfig Mar 14 2022 04:29:00 Connection type WiFi selected. Trying TCP...

They were definitely from Lolin, I ordered them with my D32 Pro for my Tiltbridge. I reset the eprom and cycled power for a full 3 min three separate times, same results :(

I had tried that before and it still doesn't help. I don't need to be connected to the ESP board right? wifi should work I assume

Yes, it sensed both of the sensors I had plugged in. I re-flashed it with the brewpi and still get the same results :( Thanks for the help

Seems to run through the tests OK, now just says "done with tests" It did display parasitic mode "off"

I used Brewflasher to flash with v0.11- wifi

So everything was great until I tried to assign pins/sensors.... I was able to add my ESP8266 controller without much issues, but when trying to assign sensors/pins, It keeps failing to write configuration to controller. I have reset the eprom multiple times and restarted the controller too. It...

That's pretty cool. Some day I'm going to have to get a 3D printer!

Thanks Thorrak! It worked on the second try. I was afraid to try to stop it for fear it might leave it bricked

Help?? After getting TiltBridge to work on a plain ESP32 board with minimal problems, I decided to upgrade to an OLED board so I could have readings displayed all the time. I set up the Heltec board and started the flashing but after about 15 minutes, it still says "Erasing". The first board...

I finally got it I found that with the last redesign, they put that under Extensions > Apps Script I still had issues but found an answer in being logged into multiple Google accounts. I had to log onto the proper account in chrome and I was able to get it set up. I also had to install the...

I've successfully flashed my ESP32 with TiltBridge and connected it to my network. Now I'm trying to get Google Sheets set up. I made my copy of the App for TiltBridge, but there's no Script Editor on the Tools menu. Any idea what's going on?

The TFT would be awesome, but the display page says it is no longer available. I don't know if that means it's out of stock or no longer made

I found the same thing. Does only the Heltec board work, or will any ESP32 OLED Board work? The price on the website isn't bad at $13 but shipping to CA is over $28. I did find this Heltec board on Amazon, but there are better rated and cheaper OLED boards there too. Please forgive my ignorance...

Wondered if it would be possible to add this Tilt Repeater Project to the list. I use TiltPi to log to google sheets, but signal from Tilts are weak getting through my stainless fermenters, and are almost impossible to pick up outside my fermentation fridges. I've successfully flashed one with...

In for the win!

+1 on this. mounting on a lid will make things much more awkward. I use 2 different brew systems, one is mounted on the lid (not enough room to mount in the side), one is mounted on the side (also a keggle). Much easier on the side!