• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Search results

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. E

    DIY 120v eBIAB Controller Help

    That'd be great if Doug is willing to re-draw it just for 120v application with the appropriate components. Those PowerCons seem nice, especially with the locking tab feature. Gives a little more security while providing QD cords.
  2. E

    DIY 120v eBIAB Controller Help

    Thank you, sir. As for going just 120v/20a, am I just swapping out the contactor in the original design for a R30A relay, and wiring it similarly? Then just making sure my element receptacle and cord is rated for 20a at 120v? Any changes in the fuses or anything else I'm missing? I know I'm...
  3. E

    DIY 120v eBIAB Controller Help

    Auber does sell some 120v/20a receptacles that actually may save me some space on the face, I'd just have to convert my element's and pump's plugs to the corresponding male/female plugs. I think they'd work though...
  4. E

    DIY 120v eBIAB Controller Help

    Hey Mirilis! I did see your build after some searching, and you did a wonderful job. That thing looks slick, exactly what I'm going for. How'd you get those trim pieces in yellow btw? I saw your enclosure and item list, and that's where I figured I could fit what I wanted into that box based...
  5. E

    DIY 120v eBIAB Controller Help

    Definitely the most cost effective, I can't even argue that. The limitations I listed in post #1 though are what's keeping me from pulling the trigger on it: -Lack of pump switch from factory (Bobby @ BrewHardware sells one with a switch though). -Like you said, 15 amp limit, meaning there's...
  6. E

    DIY 120v eBIAB Controller Help

    It sounded to me like I’d still want an element switch, and that the stop/start feature Auber lists is kind of a pseudo-workaround. The rep was also kind of suggesting that going 120v only would make for an easier and smaller build, and meet my needs. I’m kind of leaning towards just going...
  7. E

    DIY 120v eBIAB Controller Help

    @doug293cz @BeardedBrews Here's a few responses I got from Auber regarding the build: Auber: "The "element on/off switch" of WS-2500 is by the internal function of the EZboil DSPR310D. It stops sending the trigger signal to the SSR, to turn off the element. It is a different approach than your...
  8. E

    DIY 120v eBIAB Controller Help

    I reached out to Auber about the build, so we'll see what they say about what they used in their controller. I'll probably go ahead and order the components, lay them out like you said with the cardboard, and see how we're looking from there.
  9. E

    DIY 120v eBIAB Controller Help

    Yeah, I'm thinking I'll be just under $200 on the controller for the way I want it. That's not bad for a whole system cost either, I mean you literally saved hundreds by DIY'ing instead of buying a system from a seller.
  10. E

    DIY 120v eBIAB Controller Help

    I've been keeping an eye on it, hoping something a little smaller would pop up in there. Great deals in there.
  11. E

    DIY 120v eBIAB Controller Help

    Ok, makes sense, that’s similar to how we were planning from the schematic here. I think I’ll reach out to Auber, provide them our schematic, and see if they’ll put together a little “DIY kit” for me based on that build, with the few changes we made. Maybe they’ll give some insight to what’s...
  12. E

    DIY 120v eBIAB Controller Help

    @BeardedBrews @doug293cz So, guys, I happened to find this while looking around the Auber site - http://www.auberins.com/index.php?main_page=product_info&cPath=64_65&products_id=698 - it pretty much checks all the boxes for me, minus the cost. On the product page, it lists as a Key Feature...
  13. E

    DIY 120v eBIAB Controller Help

    I know the NEMA outlets are quite large. I did find these, rated up to 20A for 120/240v. Wouldn't completely future proof this controller, but the space saving is nice, and I'd pair them with their female counterpart...
  14. E

    DIY 120v eBIAB Controller Help

    I seem to agree with that logic. Figure it’d be nice to be able to detach the cords for packing up and all.
  15. E

    DIY 120v eBIAB Controller Help

    Ok, so using the illuminated switch for double duty leaves out some diagnostic capability. Reading through a second time and referencing the schematic, I get it now. I’ll have to check the specs on that contactor, try to see if I can make it fit. And I just realized I had the biggest...
  16. E

    DIY 120v eBIAB Controller Help

    Understood, so sounds like double duty isn't possible for just the switch. That's ok, I'll probably go with that mini 120v indicator light for now, just for the size. That doesn't look like it'd be immediately upgradeable to 240v, right? I'd have to switch it out. Another user actually...
  17. E

    DIY 120v eBIAB Controller Help

    Well, if the light were on and flashing, would it not illustrate that the element is both on and the SSR isn't malfunctioning? Or is that double duty not possible? It's just a thought. Also, just confirming, wire the black from the schematic just like it is (except the Line 1 in), but it'll...
  18. E

    DIY 120v eBIAB Controller Help

    Gotcha, I guess we'll see how much space I'll have, that's what'll dictate it. I'll probably go with either of these boxes, I'd prefer the clamshell for the overall sizing: (http://www.auberins.com/index.php?main_page=product_info&cPath=34&products_id=143) -or-...
  19. E

    DIY 120v eBIAB Controller Help

    mmmm margaritas lol. Since we're getting fancy with the combo light and switch, could this work?? Some red ones would be nice. (http://www.auberins.com/index.php?main_page=product_info&cPath=69_73&products_id=349) Would they just be lit when switched to on, or would it perform the blinking...
  20. E

    DIY 120v eBIAB Controller Help

    Probably another low-IQ question, but what would someone use the unswitched Aux. outlet for? Are the indicator lamps really needed? I mean, on the EZboil, there is the blinking/steady light that indicates how fast energy is being pulsed to the element. Just wondering, in case it's something I...
Back
Top