Search results

got the PIDs working in On/Off mode. Thanks to Dawai for the assistance. it turns out the PID I was using is faulty. when I switched it out with another everything worked. I need to wire up the transformer this weekend and should finally be able to test the gas system.

I figured it out, everything works fine now :)

Hope someone is able to help me. I'm nearly complete with my stand (see my signature). But i'm running into a few issues getting my PIDs working. I have never wired anything other than installing a new light fixture, switch, or outlet. So, i'm building a system very similar to a lot of other...

Completed the enclosure this weekend. everything mounted and got a few coats of paint on it. Was able to spend sometime this weekend working on the wiring. I have most of it completed. The PIDs are configured and I'm working through some troubleshooting at the moment. When the...

Will not "catch" flavor. but will the wort will heat faster and thus increase the risk for boil over. i leave the on until I reach a good boil then take the top off and let it go to town. if you leave the lid on you will trap more moisture and might not boil off the expected amount.

How does it taste?

Looks like normal fermentation. Have you measure with a gravity reading? if you cold crash before fermentation is complete and warm up, I would expect some yeast activity.

Thanks! After talking with the guy at my local electronics store I can use just about anything. as you mentioned the low voltage makes it adaptable. For ease of use and installing I with a 3.5mm (headphone type) connector and panel mount.

Love the stand and the colors! I'm working on a stand of the my own and getting ready to start wiring the internals for the control panel. What connectors are you using to send the 24v to the solenoid? I'm having a hard time finding something to you use and it would be very helpful if you could...

Almost complet with the control panel. Not long from now I will be able to test everything and start brewing on the new system.:rockin:

Getting some work done today on the system. Cutting the holes out and mounting everything to the front of the control panel.