Search results

I was just looking again on Micro Matic, Could I get this regulator http://www.micromatic.com/draft-keg-beer/regulators-pid-642.html Then take gas line to a manifold like this one, http://www.brainardbrewing.com/blog/?p=427 Then I could have my two kegs running at 12psi and IF I wanted to...

Im not sure Im understanding what or how the manifold would work…would I take one line off the regulator to the manifold and THEN to both kegs at say 12psi... Whats the second line for then? Could I simply shut the keg lines off and then be able to switch the regulator to a higher PSI for...

Hi there I wanted to get myself the correct regulator for what I want to do. I would like to be able to have two different beers dispensing. So I have my 20# CO2 tank and I am ready to buy the regulator. I was looking at this one...

Keesh, I did defrost it and gave it a good old cleaning. When I pulled off the side panel the insides were semi clean, I vacuumed out the dust bunnies which were minimal. There is a thermostat on the side so I am going to have to plug it back in and turn it to the warmest setting and see...

Thanks for the info guys…I have to go down today and look in the side panel for a temp control or something like that and see if I can adjust the temp up a little without buying another temp control. If not is this what you are referring to from ebay...

Ok so I have a question… I am as green as they come BUT I am gearing up to make my first batch and give this all a go. I have a Large chest Freezer in the basement that over the course of the past few months has stopped freezing my stuff solid. So I put in a thermometer and have found...

Hi all, I have been reading and reading getting myself geared up to go out and buy a starter kit to brew in. I figured I would read the book first, surf your forums and read here too. I already checked out my local Brew store that sells the kits and he seems very informative and a...