Search results

If you want help, you have to answer these questions. P = regulator presure You should have set your regulator presure to match the beer style and temperature of your cooling appliance. If you haven't done this, then we need to know more. H = total height from center of keg to faucet in...

The smaller the better, but it should be understood that the insulating effect of the liquid and container itself will indeed "prevent short cycling", but will introduce lag in turning off a cooling cycle. By the time the cooling is sensed in the small bottle of water, the rest of the chamber...

Fair enough, i read past that. I don't think the wall of the keezer would be a good choice. I specially if it is a cooling wall. I would expect the system would cycle like crazy.

I'm questioning the recommendations to use a separate thermowell in a Fermenter. Assuming that a setting of 65 means that this is a fementation chest and not a kegerator. The examples given to place the temperature probe into a liquid vessel other than in the beer itself would lead to lag and...

I bought it from Beverage Time. They have several lengths from 8" up, i bought the 30". The materials and product quality are top notch. I recommend this product. Tony PS - When I was searching for the tray, I searched Google Images instead of the Web results. Often you will find the product...

After a long break, I'm getting time in on the Keezer Build. My last update showed the Drip Tray with integrated Rinser mounted, but that was only half the battle. I've recently finished the plumbing work. Like a bad operation, I was forced to reopen the patient for more internal work...

I'm in!

Thank you, I'm really happy with the build. Not a woodnet member, but you're right. I'm guessing you know its an Ultimate Workbench by Ron Paulk. I just finish drilling all of the holes in the top. That step took several hours itself. I love the table, and it lives up to the billing, top...

I've mounted up the Drip Tray with integrated Rinser. I have to say that I like it! The plan is to run a small keg at 30psi to support the waterline pressure for the rinser. The main drain of the drip tray will run to a bucket of some sort. I want to keep that as close to a sealed system so...

A little flashback to the Mission & Goals. Rediculous over the top ideas - Cold Glass storage ** - Beer bottle access - Built in glass Washer ($$$'s). Haven't seen one in a Keezer yet, but I need to build and name it to get onto the Wall of Fame here at HBT. Would that be a Weezer? or a...

Good. I'd rather hear someone was posting from their phone than, we didn't notice he was stroking out until it was too late.

Glad to see you're still with us, but on a more serious note. You have several typos in your orgional post, which could be a sign of a stroke underway!!!! You should ask someone at home if you're behaving ok right NOW!!! If anything seems wierd, it likely is. There are pre stroke signs that...

The thread has been quiet lately, but I've been working in the background. First things first. The first pour has occurred, and it was a beautiful moment. :rockin: Because I wanted to push the Keezer into service for the Superbowl, there were a couple of things that had to take on a...

Yes Sir! Put me in coach!

One thing that you didn't tell us is this a fridge or freezer. Foos-n-brew's answer is assuming it's a freezer. If my Google search is correct, it is instead a refrigerator. Refrigerators are different in that they freeze the freezer section, and then share that cold air to the fridge portion...

With the Superbowl right around the corner, I want to make sure that I'm not leaking beer or CO2. These faucets are not exactly new. I used them several years ago for a fridge conversion. At first they were dripping, but I was able to stop the leaks by tightening up the faucet to shank joint...

The Mating Dance of the Keezer. The pieces are all lined up and ready to begin reassembly. I used a Dremil to cut the holes in the freezer lid, and the plastic inner skin. I did some fine tuning using the various grinding and sanding attachments. I would say it can no longer be returned. I...

The more I noodled on the build, the more concerned I became about the weight of the top. Badbrew got me thinking about adding extra hinges, that morphed into the overall strength of the lid itself. I decided to build a skeleton for the lid. This will not only strengthen the lid itself...

Frigidaire - 8 Ball Locks on the floor, 2 on the hump Model#: LFFN15M5HWB Manufactured Date: 8-2011 Internal Dimensions: 42 1/2 W x 22 D x 29 H Hump: 9 1/4 W x 22 D x 10 1/2 H Hump to Lid: 19" I'm using this freezer for my Keezer build. FRIGIDAIRE 15 cu. ft. @ local Ding and Dent...

I completely understand. :mug: However, I have no such excuse. I went to both HD and the woodworking store today, only to realized that I forgot to buy jigsaw blades for cutting metal on both trips. Three trips to the stores for hardware today. Joy! It's amazing that I'm getting anything...