Search results

I've been messing around with the keg images (bored) and I'm assuming the colors represent the different liquid levels ? Eg. Green = full/half full, Orange = ?, Red = ?, Yellow = ?

Need four.

Can you re-connect to your wi-fi ? Did you try a page refresh (ctrl F5) ?

Depends on the style your brewing. 1.5-2 qts per lb= thinner/dryer, 1.25qts per lb =sweeter.

Wanted to give a shout out to all the help ya'll provided. Didn't think I was ever going to get this going on "Raspbian Pixel" but I knew "wheezy" with a pi3 patch wasn't going to cut it! Hey day_trippr, do you have a post to setup pir with screen blanking, then waking up with the sensor ? TKS

.040"-.045" if you what to play it safe and not have to worry about a stuck sparge.

LOL. It was the first new addition after the "D". She took the Car & I kept the house! Its a wood burning stove which gets used quite a bit in the winter. I keep adding & tweaking as time passes. Just finished re-working the wall behind the kettles with some fresh cut, white ash.

Unless your get a stuck mash, run your pump wide open, which I do during the entire mash phase. If you want to slow down the flow, then run the pump wide open till the liquid clears. If it doesn't completely clear up then you might have grain slipping past your false bottom. The weight of the...

Kal Clone 30ampMash Recirculation Manifold Custom BK Hop Filter

Replaced factory barb with 1/2” barb and tapped out the hub. No more bottleneck, clogging, or bushing needed! Simple mod, wicked results!!!

Dunk your co2 tank valve in some water and see if the burst disc is failing!

I suppose you might be ok for the first 48hrs but once you reach FG you will be at risk. Could be the difference between a good beer and a great One! Why chance it.

Does it improve efficiency with someone's current setup, maybe. I use it to decrease sparge time just like the custom BK filter (see http://www.theelectricbrewery.com/forum/viewtopic.php?t=30663) I engineered to filter out hops and trub which in turn decreased my time significantly,draining the...

Are you somehow purging the air from the head space above the connection ?

I like it! Hint: leave the cap ring a little loose to allow air to escape and not enter into your fermenter!

https://vimeo.com/208058037

Any updates on the ported version ?

So what ya got ?:rockin:

Use the newest release, Raspbian Jessie with PIXEL. It includes the chromium browser! Install raspberrypints in /var/www/html/ folder. Other than that, just follow the guide.

Need some help locating the code location for the SRM color codes!