Search results

I found the leak by doing a trial run and filling the keg with gas. I went to test the prv and no hissing. I felt a Gental cool breeze by the prv. I just so apes it and found it's leaking at the boring on the lid. I'm fixing to bump the psi to 30 to seat the lid and see if that works

Yes the prv's are screwed in all the way. And no I did not seat the lids with 30psi. I did just pick up some keg lube I will try. I didn't want to put the beer in until I know I have a good seal. Going to give the 3p psi and keg lube a shot. Must be operator error. Because 2 kegs leaking with...

So I tried to pressure test my 3 kegs with 3 different lids. None are holding tight. Not sure if I'm doing something wrong or if all 3 kegs and 3 lids are bad. What i find odd is it seems all 3 lids " leak at the PRV" . All the same spot. Looked at the presure relief valve and the rubber...

Tempting. Wonder how much it would cost to get it to alaska? What's the weight if this is still available that is

Sounds like you have a 5g fermentor. I had to go buy a 6 g carboy. This was something I overlooked as well. I'm a noob but the guy at my lhbs asked if I had a six. I said no and bought one. Turned out in my favor.

I have two batches under my belt both used us-05 it seems to take almost a day before becoming active both times I used it.

I've looked at various diy mash tuns. I was more or less looking at the question of "is an ice chest better because more are to sparge the grain vs and igloo round water cooler?" It seems they both work really well. My next batch I want to do biab due to it being cheaper equiptment wise. I'm...

Thanks for the feedback. That's the info I was looking for. The round coolers are quite pricey. And I could do more with an ice chest. I would hate to have a larger grain bill and not enough volume in a round. I'm still like i said a ways out from needing one. I'm pretty new to brewing. So far...

Should i build my mash tun from an igloo ice cooler or regular cooler? My friend and I were talking about it. He want to build his with a cooler because the larger surface are for the sparge water to go through the grains. Me being new figures igloo cooler because thay what I see most...

Mine was partly pulled off on mine. I think it is where they pump foam in. I may stand corrected. It's in the same spot and simular looking.

This thread made me go from lurker to joining. I've started my second batch and am encouraged by the stories in this thread. Thanks guys you all rock. All noobs should read this.... wow.