Search results

You are using your noip user and password, correct? Mine worked and showed my available host names. Sent from my SCH-I535 using Home Brew mobile app

Yes! Mine does that, too. I double checked the settings and made sure they matched the instructions and I get that on two different monitors. I thought it was the monitor at first. Sent from my SCH-I535 using Home Brew mobile app

You guys rock! That took all of about 10 seconds to get set up! For anyone else that might run in to the same issue, here are the instructions for changing the port: http://www.noveldevices.co.uk/rp-webserverport And the instructions posted earlier about the no-ip set up worked, too...

That's kind of what I thought. Thank you for the help! I'll do some searching. I'm leaving on vacation tomorrow and am hoping to get this up and running so I can show it off when I get there :)

My webcam is a stand alone wifi camera (DLink). It is set up on port 80, so I can't use that for the pi. I went in to my router and changed the port forwarding for port 8888 to the server ip for the pi.

Ok. So I figured out the webcam was using port 80. I changed the port forwarding to 8888 (used to use this with dyndns). I can't seem to get it to work with no-ip. I used mybeer.no-ip.biz:8888 but it says it is unable to load. Is there anything else I need to do on the raspberry pi end...

I had the same issue until I read a few posts back. I think it's ctrl-shift-q that gets you out of that screen. Read back a few pages and you'll find it off I'm wrong. It's not locked up. It's just in full screen browser mode. Good luck! Sent from my SCH-I535 using Home Brew mobile app

Third times a charm! I had a lot of problems with it just freezing up during install. I reformatted and reinstalled 3 times, but got it working. And thanks to this post: I was able to get it all wrapped up. Thanks Waffle! I can't wait to show it off to my friends. And thanks to the...

I just wanted to say nice job to those that got this up an running. I ordered my parts today, and they will be here on Tuesday. I've already done the downloads and am looking forward to getting this up and running. I look forward to seeing where this goes from here (flow meters, etc). I have...

A buddy of mine works the afternoon shift (3p-11p). He asked me to make him a batch of Caribou Slobber. I did and he loved it. Now he wants me to make him an 11:20 beer. His only requirement was it was a good beer he could drink when he got home at 11:20 PM. I know he likes the dark beers...

Wow. These are some great items. I'm in! Thanks to the board for being here to support the community and thanks to those who donated items for this for supporting the board. (I'm already practicing my acceptance speech... )

Mine is The Leaky Tap Bar and Grill. When I first started brewing, I kegged instead of bottled. I didn't have my keezer yet, so I put two kegs in my spare fridge with the taps attached to a piece of wood inside (didn't drill holes in the fridge). Anyway, if the door was closed too hard, as...

P-J, YOU ARE THE MAN! I was at work today when I was posting. When I got home, I decided to reconnect that ground, just to see what happened. And just like that, it worked perfectly! No breaker trip. I can only imagine what went wrong the first time. Probably a loose connection or...

I ordered one of those systems from high gravity and it will be here tomorrow. I need to finish my basement (cut a hole for the exhaust) before I can use it. Unfortunately, Saturday looks like my best day to do that. It will be a heat wave of 28 degrees that day. Once i get it running and do...

Actually, I don't have a control box yet. There's nothing plugged in to the new outlet yet. Hopefully it will be here in the next week or two. I am just trying to get ready for its arrival. Sent from my SCH-I535 using Home Brew mobile app

That's what I had. The above picture, plus the wire between the two busses, but that kept causing the breaker to trip. Sent from my SCH-I535 using Home Brew mobile app

P-J, I am hopefully attaching a picture. I got a new breaker, and that fixed the GFCI issue. Expect for the fact it popped as soon as gave it power. When I removed the wire connecting the ground to the neutral, it worked just fine. Except now it's not grounded as far as I can tell. I may...

P-J, I got this spa panel and wired it according to your drawing, and tested the outlets with a meter. All was good until I tried the GFCI test button. Nothing happened. Am I to assume the GFCI is faulty in the breaker, or could I have wired something up wrong? The only thing I wasn't...

Nevermind. I finally got the right set of words to find this post: https://www.homebrewtalk.com/f170/spa-panel-wiring-dummies-266751/ #2 has a picture from P-J and is exactly what I was looking for. It's even the panel I was looking at.

Thanks again for all of the advice. One last (hopefully) question. The power I have coming in to the dryer is running on a E18679 (UL) AWG 10 CU 2 CDR with AWG 10 ground. I think it's 3 wire (I haven't taken apart the outlet yet to look). Is that going to be a problem to hook up to a spa...