Search results

as long as you have complete conversion the 90 min is excessive. with the modern modified malts 60 min. is plenty. To be honest you probably could get away with a 30 min. mash with today's malts, but I have never tested this theory.

56, now pull up your pants!

Straub is a old small regional brewery that's been around since the 1870's located in St Marys Pa that has brewed the same style of American lagers. While I was at my local beer distributer they were giving out samples of straub IPL a huge change from their normal offerings so I gave it a try...

:rockin:

:rockin:

Are those pumps self priming?

I'm a plumber and just use the clear PVC cleaner to remove the sticky residue. You'll need to do a good cleaning after to remove the PVC cleaner remains.

Then no, the GFI would trip.

If your asking if its ok to use a 15A plug in a 20A GFI then yes, As long as your wire from the plug is 12 gauge.

electricity will almost always be cheaper just because of how much more efficient the elements are being in direct contact with the wort. Burns are very inefficient just because a very large percentage of the potential BTU's rolling out from under the pot and ends up heating the surrounding...

buy the element measure the dia. then buy the correct punch or holesaw.

the highest watt element for 120v would be the camco 2000w model 02203 on amazon.

you could always turn it back into a beverage cooler.

well at least it was a good close hard hitting game.

be real brady was good in his first 5 years but has not won the big won since. he keeps losing the big games. the great QB's win the championship games not lose them. montana, bradshaw, won their super bowl's.

I guess after yesterdays performance we can safely say this is not even close to the truth. Not even sure he is in the top 5.

your creativity and workmanship is top notch. Being a private pilot I understand how aviation can filter down into your other interests. I have been trying to find some old steam gauges to mount as tap handles but have not located any junked gauges yet. Your aluminum rivet look is perfect.:rockin:

maybe you could run 240v wire up to the dryer outlet with the correct 240 plug. Then you could unplug the dryer and plug in for the brew elements. kind of a pain but simple.

as long as you don't crush into powder double crushing is ok.

The efficiancy number I am concerned about is brew house. this is the number I need for formulating recipes in my recipe calculator. most of us usually will be in the 75-80% brew house efficiency range.