Search results

For those interested I posted brew day number 2 in the other thread. Here is brew day 3. They're just quickies but they show the system in action. https://youtu.be/OEO9UonS4ZU

It's not that big of a deal. It's a cheap way of doing what they're doing but not a deal breaker at all. If it bothers you just drill a hole in the basket and screw it through both ears until it's tight.

It is pre touch screen. The automation worked awesome, $45 well spent. Just ebay search 1/2" automated flow meter. It was calibrated perfect from the factory. Ended up with two 6.5 gallon batches which is what I was aiming for. As far as the hop spider I got mine from Arbor fabricating...

Brew day number 3 today. Water automation was hooked up last night, definitely the way to go. Cherry wheat today, using a hop spider today for the first time, brewing starts at 5.

I'll be installing automated water. Got a set up off Ebay for $45 shipped, we'll see how well it works. The touchscreen wasn't an option when I ordered, if it was I'd have definitely went for it.

That's basically what I did. Raised the kettle up 12" and the pump/chiller stand up 6". If I did it again I could easily go 18" on the stand.

Brew day number 2 down to a 3 minute video https://www.youtube.com/watch?v=pAK9v_-S8Pc

Brew day number 2 went perfect until my buddy tipped a conical over that was full of beer. But the brew day went well and we still have 5 gallons left.

Mine should theoretically be 212 also but both my nano system and my old system boiled at 209/210.

Yes, we were videoing a how to and trying to catch it from a first time all grain brewer on a new system. Walking through the steps at the beginning from milling the grain to a protein rest at 120*. Milled the grain, showed the crush on camera, showed how to set the PID, and then without...

Brew day did not go well. Stuck mash, added grains way too early (we were videoing the brew, just not thinking at all), scorched element. Hopefully the beer turns out OK. The sample didn't taste burnt and the OG was spot on. Did a 10 gallon version of Yoopers Oatmeal stout. Fingers crossed...

Made my stand today: First brew day is tomorrow

https://youtu.be/pNvTdaA2gl0 Little video unboxing and water testing.

Sounds like they take them apart to weld the triclovers on and maybe the gasket didn't get put back in right. Either way Tim is taking care of it. Couldn't ask to deal with a better guy.

It leaked out where the plastic top part met the steel bottom of the pump. I'm going to guess there's not a gasket there and should be. I ordered a chugger today so hopefully I can just get a refund on the pump.

I got my yesterday, like you guys my box was basically destroyed but the equipment was all in good shape. Missing a couple things and seriously not happy about the pump switch. They were still supposed to include a chugger when I bought mine. I did a water test and needed the pump to pump the...

I got a tracking number. Better late than never, hopefully get delivered early next week.

Was told mine would ship today. Fingers crossed. Jealous of all the pics.

Was told mine would ship last week, then this week, emailed yesterday and got no reply :( I'm ready to brew!