Search results

Welcome, from Saint Paul.

I bought 3.5 gal buckets from uline with their ez-peel lids and I LOVE them. I originally bought 5 and was going to pass along some of them... but now I'm using all of them because they're so easy to use. They ARE food safe and durable. The lids seal well and are easier to remove than some of...

Make a brew with the chinook this year and call it "sacred cow".

I too went through keg connection for most of the pieces, including the taprite regulator. However, being a cheap dude, I opted for used kegs from homebrewing.org and couldn't be happier.

The bucket height is listed at 10.75inches on uline's website. That's about 3 inches/gal, which leaves about 1.5inches between 3gal and the top. I haven't had the opportunity to ferment in these buckets yet - so this is an estimate. It's not a ton of headspace, but especially for secondaries...

I'll snag some pictures tonight, but here's a link to what I ordered: From: http://www.uline.com/BL_8150/Plastic-Pails-and-Lids 5 white S-9942 (buckets) 5 white S-20541 (lids) 3/8inch grommets from home depot go into 1/2 inch hole in the lid

EDIT: no longer for sale I put together bucket fermenters for 2.5-3 gal batches - I only need 3 and the minimum order on buckets was 5. The buckets have an easy to peel off lid with a hole drilled for an airlock (with grommet). The buckets are the same diameter as standard 5-6gal buckets...

I brewed 2 extract batches at a local brewery for Big Brew Day - and instead of bringing recipie sheets for the boils I input the recipies into Evernote in checklist format. My Pebble used the internet connection through my phone to display the checklists conveniently on my wrist. The watch...

In for sure!

Sorry to hear about Otis - we've only had to say goodbye to 1 dog so far, and it was very tough. Otis and Porkchop can have a beer together now. (yes, he's sitting on Santa's lap)

I poked around for a bit in some scientific journals to try to find some results, because surely with all the drinking scientists do- someone has tested this. :mug: So far, this is the closest I've found. http://pubs.acs.org/doi/abs/10.1021/ie50281a014 The comparison of the gaseous CO2...

Because the carbonation involves some chemical reactions, the lasting carbonation will be dependent on the enthalpy of the carbonation reactions and the mole ratios of the balanced reactions - as well as the pH of the beer being carbonated since the reactions will involve H+ ions.

I went the route of a 12v PC fan connected with an old cell phone charger. Fan was from an old computer about to be recycled at work and the cell phone charger was from 7-9 years ago.

I noticed immediately after adding the fan that the temp on the thermostat stayed consistent for much longer, reducing the compressor cycles.

Recently finished my first keezer build. I have 4 3 gal pin locks from AIH and had been using this 5cf freezer with a temperature controller as a fermentation chamber. Left co2 outside of the freezer to save on space, it's a 20lb tank. 3 perlick faucets on the front- 2 525ss and 1 575ss...

I have a utility pump hooked up to my home made immersion chiller to pump first "room temp" water, then ice water. It allows me to recirculate the water from my rain barrels through the chiller (and recapture it). The ice water is dumped into the barrels after it has melted - very little water...

I've been using a 7.5gal turkey fryer for a bit over a year - and it isn't optimal, but - instead of spending nearly $100 on a kettle for a hobby I wasn't sure about at the time, I got a burner and a kettle for less than $60. I was also aware of the possibility that I might want to switch from...

I use one of the bucket lid removal tools. It's plastic and I picked it up from home depot for a few bucks.

Nice! This is sort of why I planted hops - they keep the weeds from my neighbor's yard from spreading into my yard.

We have a foster pug right now whose nose is so smooshed that the wrinkle above it actually protrudes out in front of her nose. ...she snores, unsurprisingly.