Search results

I'm in, I could use a Fermentation setup for the summer.

Drill Bit? not sure I'm clear on what your asking.

Subscribed ! ! ! !

When I worked at a Copper tube plant we would clean out tubing with a Cleaner and a foam plug to follow it. Then use air pressure to push it through the tubing. You could do something similar with a small foam plug and some cleaner like PBW.

This http://www.harborfreight.com/1-2-half-inch-heavy-duty-spade-handle-drill-93632.html

The bracket on the back of the drill was my first attempt at making a fuel tank bracket for the plane I'm building. I messed up drilling it so it went into the drawer of shame. when this project came about I opened the drawer and it fit the bill.

I have not used carb drops, but was thinking about them recently and now I have a question. When I go to put the priming sugar into my bottling bucket to prime i always boil it for a few minuets to sanitize it, but if i was to use carb drops how do i sanitize them? I'm guessing you don't...

Try this thread. https://www.homebrewtalk.com/f46/esky-ice-water-proof-labels-224476/

I'm not so sure it is going to be all that oxidized. For the O2 to be disolved into the beer quickly it needs to be under pressure. you only used enough pressure to move the beer not something like 20 or 30 PSI. At low pressure it takes time to disolve any gas into a liquid, so I'm not sure...

Do This

I would like to do something like this. Subscribed.

Watch this for a Quick Fix to over carbing.

Check this thread about removing Corona Labels. it should work for your painted labels. i have used the soak in starsan for a week method and it works well. https://www.homebrewtalk.com/f35/removing-corona-lables-312812/

The drill is from Harbor Freight. 1/2 inch slow speed. http://www.harborfreight.com/1-2-half-inch-heavy-duty-spade-handle-drill-93632.html The stand is from stuff i had saved in my shop from other projects.

The 6 gallon carboy was just emptied and the 3 gallon carboy does not get much use. As for the Corona Bottles I use them to bottle a couple from each batch to check clarity.

I bought a grain mill a couple batches ago and right out of the box knew I was not going to use the handle. So I started to use my drill to crush grain, but found a problem with that. I needed three hands ! ! ! ! ! Trying to hold the drill, the top of the mill so it would not come off the...

HOP BUY ? ? Sounds good to me.

5 g of a Mexican Lager 7508.5 + 5 = 7513.5

for winter brewing I use a large tub with water in it. Place in the fermenter and use a fish tank heater to keep the water at the correct temperature. I made a thermostat temp controller to control the fish tank heater as the heater is not made for the temps of fermentation it is made for...

Confirmed