Search results

I am planning on building my keezer here pretty soon. I have seen all kinds of designs on here and am milling some things over in my head. I dont really want (nor am I capable) of building anything fancy like so many of you have (jealous by the way) and just am looking to do some basic...

Ok, thanks guys, I appreciate the help!

so I bought a 2 pack of one gallon paint strainer bags, just sanitize it, secure it with a rubber band that has been sanitized and use my auto siphon like usual?

Nylon paint strainer bag? Do I need to use a full one or can I cut them to size so I have a large supply or can the nylon bags be reused?

If its too porous what kinds of specific material work well

Like the grain bag or smaller? And what kinds of items are made of nylon mesh? Is cheese cloth not good?

Once on here somewhere some suggestions on how to filter out the residue from dry hopping when putting into keggs. does anybody have any Easy solution to keep dry hopping material from entering the siphon tube and having a bunch of sediment in the bottom of my keg?

Is having an all stainless steel faucet better than a chrome plated faucet with brass internal levers? The price difference is not all that much but was wondering if all stainless is a far better product? Any ideas on this?

craigslist for the freezer and amazon for the johnson controller. Make sure to get at least a 5.0, hard to fit 2 kegs in a 3.6 cuft freezer, besides unless you get lucky on craigs list they are more expensive than the 5.0

I have been looking on the internet. We have a good supply store where I am from but they are expensive even when you calculate shipping. So far I have been seeing about $150 for the set up for 3 taps

Where do most of you get your supplies for your kegerators. I am looking for a 2 or 3 tap . I have the freezer and the thermostat now I am just looking for the faucets, shanks, handles, hoses, connections and manifold. I was expecting it to be a little cheaper than what I am finding. Anyone...

Is that a 6 inch collar? Now I am thinking of picking up another keg!

I tried putting my bottling wand in my picnic tap and it cracked the tap, I filled my growler with low pressure from the co2 and had a little foam but not bad, I am going to try a few bottle tonight to give some friends a sample of my beer. I would give them each a growler but 1) I like my beer...

I just got myself a 5.0 cuft freezer too, but I can only fit 2 kegs in it, can you get a picture of the inside so I can see how you are arranging your kegs? I have 2 5 gal corny kegs, are you using something different? I have not heard of epoxy paint, did you have to brush it on or is it...

There is only one dial on the thermost, I made sure the sensor was not against the wall and more in the center of the freezer and moved the thermometer away from the walls as well. Since beer does have some alcohol in it, what is the approxamate freezing temp of beer, I like my beer cold and...

After plugging in the Johnson and having it set at 38 degrees, the temp in my freezer went down to 33 degrees right away I know there is some variance but that is 4 degrees in a short 20 minute period or so

Howdy neighbor! This is my third batch so I am still working with extracts and specialty grains. I brewed the first two for others now it's my turn. I found a Stone IPA clone off the net and am following it fairly close but splitting the batch in half and dry hopping with two different types...

It's brew day and I am imagining that heaven smells a lot like my garage!

That's what I was figuring, seems counter productive to use the coldest setting in a freezer

I just got my Johnson's Control thermostat for my keezer and the instructions say turn your refridgerator to the coldest setting. Is this the same for a freezer or do i need it on the warmest setting for the freezer?