Search results

Sorry to hijack. What are you using for ammeters? How are they wired?

They are G 1/2"? They are G 1/2 flat seal with a special gasket. Not sure you need this... but not sure if I want to try it without. They have other options for about $70 with the adapters installed, and the M12 Also, what size power supply are yall running? I just need enough 12V juice to run...

So the IFM 6004 is going for like $45 shipped on ebay. https://www.ebay.com/itm/TESTED-IFM-Efector-SM6004-Electronic-Magnetic-Flow-Meter-25-L-min-6-6-gpm/123793536725?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 Figured this would be perfect for HLT-MLT and HLT fill. Question...

AC power from an extension cord and a 3d printed gland. I will eventually move these to be wireless, but the Pi is centrally located between my Kegerator and Fermentation Chamber. Spades, yeah, maybe later. These outlets are like 20c each, so if one breaks ill trash it. That was the original...

Need more coffee. Sounds like a flow issue.

Also, may be helpful to see your P-I-D settings for each controller.

Agreed. To me it's just easier to access my AmpliFi app and change reservations. Way faster than accessing individual devices and messing with different OSes.

PLA, I use PETG sometimes, but it is a pain. I have a build thread here Definitely. I designed this in Autodesk Fusion360. I will post the STL on thingiverse and I can throw in step as well.

I had to revise the case design a couple times. USB for arduino was about 5 mm off and too small. Wall between outlets broke due to being thin and unsupported. 3.5mm jacks dont have enough thread to penetrate 3mm wall. Arduino power jack screwdown hits the pins. (fixing this tonight) Should...

Decided to convert the old fermentation deep freeze from STC-1000 to a IoT web enabled thing. I am using the BrewPi Remix firmware for the arduino and Fermentrack on the front-end for the pi. Most of the parts were leftovers from an old project, but I will still link what I used. Parts: 1 -...

I will try and do a post about the build with parts and everything. I printed 2 rough copies of the bottom case to dry fit, and the second was great except for the 3.5mm fitting. Now I have 2 failed prints on the final piece.... So once that is done....

I didn't even think about RJ-11 or RJ-45. I used 3.5mm stereo jacks... had them laying around

Yes. https://www.amazon.com/dp/B07RRY5MYZ/ref=cm_sw_r_cp_apa_i_sbpHDb3PAPXA6 2 screws and a switch. They also have panel mount variants. Also I did see the thingiverse version. But I wanted mine to work with things I had laying around, and to not have cutouts for things I won't need. My...

A work in progress.... I don't own the LCD but I want to get one. So if you have dims (mm preferred) i can get that added. Printing the rough draft atm. Hopefully I have enough plastic to print this.... The outlets are leftovers from a automated SaltWater aquarium (reef-pi). They actually...

To be fair, you can set up BruControl right off the bat to simulate a control panel. No scripting needed. The outputs act like buttons by default. The PIDs have interface to adjust SP and you can manually open and change outputs. If you haven't committed and don't want to bother, I have my...

BruControl

Awesome. I created a page for our "Home Brewery" and requested the access tokens for the API. But I doubt I will get it.

I don't have my finger on that pulse. It seems like there are 2 forks in the other thread.

Where do you find your untappd access token?