Search results

Thanks a bunch for the replies....I'll check into those suggestions....a little short on time to troubleshoot but will get back..... Forgot to mention that I did check the Read Values box every time I was retesting to see if I had found the problem with results as shown.....going to try...

Can anyone look at this and see if they see anything wrong with the wiring...sort of at wits end and have gotten nowhere....changed to new sensors with no difference and also added power to the UNO directly so don't think it's a power issue.....any think else I can test? thanks...

Are these hydraulic connectors ok to use? http://www.discounthydraulichose.com/ISO_7241_Series_B_Quick_Disconnects_Complete_Set_p/700-xx.htm or do I need to find SS? Also is this solenoid valve OK...

I have previously submitted a pic and ask if the wiring was correct but it didn't seem clear enough to make and remarks about so here is another pic which I hope is better and one of the console.....can't get the temp probes to show up when I scan for hardware....any comments most welcome. thanks

Hey I'll take one of the systems to monitor my 4 conical glycol cooled beer fermenters....sounds awesome....who do I make the check out too ;)

Since my last post at https://www.homebrewtalk.com/f51/howto-make-brewpi-fermentation-controller-cheap-466106/index131.html#post6298642 Haven't made any progress trying to figure out what's wrong....seems there was a suggestion of not enough power to the UNO but not sure if that was directed...

Can anyone spot anything wrong with this wiring, can't get any devices to list! See attached pic.. Red on left is 5 v, black is gnd and white is data.

Yeah I had that problem for a few times and found placing black on the ohm side gave me reading after that

I'm using a FLUKE 101 and it has a decimal place of M in the test window for the readings I get.

Yeah, sure thing....I purchased about 8 1-wires and have tested them all and they all give about the same readings....here's what I did...if I placed the ohm lead on the black wire, I got a reading of appx. 14.00 on the red and bout half that on the white...did I interpret those readings...

I have never been able to connect without a working internet connection, otherwise I get the Page Will Not load error...don't remember the exact wording, but has never workee for me..

Thanks day_rippr for the reply...here is what I get: No installed devices found Parsing available devices Device list updated for Arduino standard with a revC shield No installed devices found. etc I know wbarger69, this was determined using and voltohm meter and using the instruction given to...

First of all, awesome DIY project that I've followed since the beginning and have read it's entirety twice....wish I could have remembered all the problems and their solutions, but didn't work!!! Here's my questions as I'm trying to figure why my build doesn't find the 1-wires attached and...

Just finished reading all 112 pages and so much information to digest, wish it could be indexed for future use. So many amazing ideas and useful links. Awesome contributers, hats off to your time, patients and wisdom! Thanks

Hey BrewerJack, in your post #177 you said to do the following: ". Add your Windows box's IP and the port you want to forward (I used 8888), then get your guest box's IP by typing 'ip add' on the command line of the guest box. " Can you elaborate on how to do this...not a Linux guy, and Thanks...

I recently purchased 2 from lotfancy and they were very good about letting me return 1. I had opened 1 and cut the label so I kept it as i figured they couldn't sell it and that was my decision, but very good to deal with.

Anyone know for sure where the A400_P version can be purchased? I've got 3 of the regular ones and don't need any more of those for sure. Itching to do this project if I can only find the right hardware.

On the very first post, the tab on the plug is broken on only one side, correct....

Thanks for the bad news...any ideas on where I can get the good ones....seems bad that you don't know till you got it home and have to open it and make it unreturnable to find out....glad it's not a really expensive item.

Just purchased 2 controllers but think that they appear to be different than what i have seen posted. Please see attached pictures and tell me if this device is workable.