Search results

Something else to consider: when pulling the grain bag or malt pipe out after mashing, it's surprisingly heavy. Especially with the tall/ narrow design of the coffee urn style units (mash & boil, robobrew, foundry, grainfather). If you're planning on putting it on a counter, I'd highly recommend...

The user group on Facebook is really helpful. Shane and John are on there all the time, as well as Brian (short circuited). Just ran my first batch the other week on 120V and looking at swapping to 240. It was super easy to use, but the recipe (from zymurgy) was pretty lackluster. Shane has...

You can get an in-line LED dimmer switch that'll reduce the output further.

I'd probably save money and go with an Anvil Foundry. It may not be as fast as other systems, but it's significantly less expensive.

While this thread is bumped from recent comments: has anyone heard any updates on the SVBS system? Last I heard, they were targeting late spring to "hit the summer crowd." Edit: Called the SVBS the eBIAB system. Fixed for clarity.

I used orange zest last year and had no off flavors, but I avoided the pith entirely. This year I'm giving the dried / bitter orange peel a go. Thoughts on adding 4oz honey malt to get more honey flavor to come through (5gal batch size)? Not sure it needs it, but as long as I'm making 2 batches...

Pumps aren't needed, but can help provide more consistent temperatures while mashing or quicker cooling after the boil. Either of those could be achieved by intermittent stirring for less money (and cleaning of equipment).

Question for those with the system: what's your boil-off rate on 120V vs 240V? Looking at getting this but can't really fit proper ventilation into my basement (doesn't look compatible with the steam slayer either).

This type of system is pretty straightforward- you don't have to mess with balancing the burner output, don't need pumps, coolers/ mash tuns, a brewing stand, or other equipment. A new brewer could effectively plug it in, run it (after learning to use the control panel), and pour straight into a...

Here I was ready to pull the trigger on the Ss system... this controller looks much more functional at a significantly better price point. Definitely going to read up on this some more!

Glad to help! Edited my earlier post to add the Ss link- comes with lines and some insulation in addition to the QD fitting.

I usually see the quick disconnects produced by CPC. US Plastic sells them at a much more reasonable price, and you can get single or double connectors (double linked below): https://www.usplastic.com/catalog/item.aspx?itemid=118175&catid=743 You'd want the 3/8" version, and would need both the...

The larger reservoir size just means the compressor will kick on less frequently, but it also means you're replacing ~5 gallons of glycol every year or two instead of just 1 (Penguin). That alone will outstrip the cost savings from the flash sale. It's a tradeoff between compressor life and...

I've used this one for a while. It is food safe, rated for boiling temperatures, and cheap. It gets the job done for basic transfers and recirculating while mashing or chilling, but it won't be able to whirlpool. Avoid getting grains or hops into the inlet. The MKII is another option...

I've seen a decent number of 2V systems on the Ss facebook user group. People seem to be happy with them. As for the "SVBS", they suggested their goal is to release late spring. I recall hearing somewhere that the system would not be compatible with the eKettles based on component designs...

Brew Mentor is doing a "Big Brew" event on May 4. I've got no idea what it is, but saw it on Facebook and will probably swing by if time permits.

I know Ss Brewtech uses those on their electric system, and I believe Grounded does as well. They seem to be pretty good, but I have no personal experience with them.

According to the facebook usergroup, the cables are about 1 foot long. It does not come with extension cords- I was told they were available on their site but could not find them listed.

It is also very important to use equipment rated for the application. The ITC 310 can handle 220V but is maxed out at 10A. The Auber ezBoil is very popular, and Auber offers both a plug-and-play option and a DIY kit. Others use PID controllers, and some use a PWM dial (sort of like adjusting a...

It definitely needs access to 220V and 120V outlets. The element runs off the 220V while the accessory plugs are 120V. The general consensus I got from the Facebook user group was that the built in cables are pretty short (I'd like to get an actual measurement though). I reached out to Ss...