Search results

Got it from config file. Will upload a picture of the flowmeter used if tests are successful. Thanks

@LBussy would you mind posting the IO's numbers used for the DS18B20's,first 2 flowmeters and cooling relay and where pullup resistors are needed,or a schematic diagram ? I have bought some really cheap flowmeters and would like to bodge the wiring to test accuracy (and foaming) before making...

Hi @ZeSlammy I did not think of looking at the serial. After looking at log output I noticed my firewall was blocking internet access to that device. When allowed to access internet it works fine. Thanks for reply ! Ispindhub LCD & web interface looking good now,thanks for all your effort.

Is anyone else experiencing this with the latest direct version binary ... After flashing with brewflasher or esptool,the captive portal comes up and can connect to my wifi network. I can ping its IP address,web page fails to open. LCD hangs showing Ispindhub by slammy and connected on the line...

@Rippchen Do you have issues with the load cells reported weight drifting over time ? I am considering this method as well but read people have issues with drift. I have procured some flow meters which is another option.

I found exactly the same thing. Usually a small white mound on the bottom of the boiler while cleaning up after a brewday Also in PE

@ZeSlammy Cheers for adding brewpiless as a target,have been off the board for a while. :) Could be me but when installing the plugged in version using brewflasher,the 2nd file is not sent to the D1 mini,I assume this is the littlefs file? Resulting in a hello world in my browser when going...

@ZeSlammy Did you perhaps have a chance to add push to brewpiless functionality yet ? Cheers for all your efforts !

Would anyone presently using flow meters comment on foaming and the cleaning procedure required. I assumed flow meters would be a pita to clean and don't want foaming issues,that is why was looking at a load cell option. Perhaps they are not too bad after all. Cheers

@rkhanso ,thanks for the links,will check them out. I use openhab to automate things around my house and monitor my keezer and brewpiless using MQTT. I had the same idea of using loadcells and an LCD to show bargraphs of how much beer is remaining and MQTT this info to openhab,then found kegcop...

Firstly, many thanks to @LBussy for sharing this really cool project (pun intended!) Are wondering if there is any chance of load cell integration into keg cop,possibly using HX711 amplifier,instead of flow meters ? Also,what are your thoughts regarding using load cells for keg monitoring ...

@ZeSlammy Yeah ! More feedback. - Regarding Colors : I'll look into it and will try to offer options - Regarding Download of files, I'm on it, seems like a file system capacity issue or something - Regarding the ° sign, it's a font issue While you are busy with all these code changes,please...

@DuncB I want ispindel readings to be displayed on the ispindhub LCD as well as in brewpiless web interface. Is easy to look at the LCD when walking past my fermentation chamber to see all is OK. It seems to me the method above will only send to the brewpiless ?

tbh I havent really looked at it again since zeslammy offered to add brewpiless as a target and have been out of town for work. Did you get it working using the URL target option ? Thanks for the heads up

No worries, work gets in the way of my hobbies too ! Cheers

@ZeSlammy A friendly reminder please :)

I use brewpiless to control my fermentation chamber,can I use URL target (put brewpiless IP address here) to push ispindel readings to brewpiless ? Will it work like that ? Not sure if you saw the edit to my post above.

Brilliant,is now working when connected as you say above. Green tab image shows text overlapping each other (font too big) and white border is off the screen at the top of LCD. Red tab image works perfectly though when wired as above. Thank you for your help ! I use brewpiless to control my...

Webserver working but still only white LCD screen. Log below ... 2021-05-02T14:42:22Z,iSpindel032,62.3900,17.99,4.14,1.0420,900.0,-57.0,, Avant delay V: Serving /config/. N: [WiFi-event] event: 7 V: Sending /iSpindInfo/. Après delay Début du Loop On a ouvert le Dir File Name ...

Thanks chaps for your efforts. Unfortunately still only backlight lights on the LCD and no webserver in browser again. I just noticed my LCD has 2 different pins marked D4. Will check if one is actually D7,just wrong silk screen on PCB Début du Loop On a ouvert le Dir Début du Loop On a ouvert...