ZeSlammy's latest activity

With your latest modification, it works just fine with Dual Heater mode. I retrofitted a Klarstein Brauheld Pro with a BrewManiac...

Have you tried changing the baud rate at which putty dialog with the "solid blue" one ? You remove the battery when you soldered ...

So what is the situation on the one you are trying to flash ? All elements are presents ? You put in a new Gyro ? Putty sends data to...

I added this in pins.h and when I compile with SecondaryHeater, I know have 3.3 on D8. Is this normal ? #if SecondaryHeaterSupport ==...

OK I rechecked everything, doing everything back step by step. I ckecked my BC337s, my diods, my Rs,nothing fried. My issue is that...

Ok quick update (and call for help). I get it all up and running, have a dual heater setup. Pump work, Heater 1 get 11 or so volts on...

@rkhanso CBPi4 is still in pre release, more for tinkering than ready to roll

That's the one I VS-Coded onto the system. I might be a victim of the "Wifi settings" bug. Too bad the logging isn't verbose :( What I...

I've built and started using the Brewpiless setup on an ESP32 with iSpindel. I absolutely love this project. I have a RPI on hand, so I...

I might :/ What I want to use is this project (BrewPiLess) I got a board that is indeed from the BrewPi Project Nevertheless I thought...

Soooo ... I finally built up my BrewPiLess / BrewPi-8266 based on @LBussy 's PCB, printed a 3D enclosure and everything and ... no dice...

Out of maybe 100 iSpindels I built so far, I had ONE pelting with a dent in the lid. They are otherwise pristine. That being said, not...

https://github.com/terragady/CraftBeerPi

It seems like Manuel and CherryPhil will have some soon (Europe though). In the meantime some of us are working on boards too. Will post...

I just bought that : https://www.reboul.fr/storage/0000309c.pdf I might have to bend some pins but I guess it should do the trick. Edit...