Recent content by W0rter

Here's some pictures. Let me know if you want anymore, possibly highlighting an area. I have connected some more of the components today, I'll post completion pictures when i'm done.

I live in Defiance, OH Mid way between Toledo, OH and Fort Wayne, IN When I get out to the shop, I'll get some pics. Diagram is same as P-J's with the addition of a second pump switch.

Has anyone else run into this? The whole time I was building this panel I had plans to go to our local electrical company and have someone check over my work. Well I'm getting close to being done so I packed up the panel and drove to Gustwiller Electrical Supply. almost immediately upon looking...

I think I just found my answers at posts 533 to 538.

I need a little help understanding the Alarm Silence Switch. My understanding is that it's a two position maintained switch 1 Normally Open and 1 Normally closed. on PJ's schematic it's switch #4 with terminals numbered 11, 12, 21 and 22. It depicts wire at #22 on the switch from terminal #13 on...

I need some insight. I'm building this panel as designed by P-J. I had been in the building process several year ago and never completed it. As I was looking over my parts prior to building I discovered I don't have the SYL-2352 but I have the SYL-2362. I'm wondering if the 2362 will function as...

Thanks stlbeer that explains a lot. So the probe itself is the resistor. That makes me wonder if there is need for initial calibration?

Could somebody please explain to me the significance of the resistor symbol between screw 4 and 5 on the PID? And what resistor should be used? I do realize the two red wires from the RTD go to terminals 3 and 4 and the white wire goes to terminal 5 but I don't under stand the resistor symbol...

It looks like a nice idea, but I wouldn't know how to adapt the drytrap to my Conical fermenter.

Luckily I didn't have any thing that looked bad in my blow-off container. I did a constant observation. until my keg sucked half of it in.

It's kegged now. I put 12.5 PSI of Co2 on it and I don't want to try it for at least two weeks. I doubt I can wait that long though.

It wasn't sanitizer it was boiled water. I had boiled some pint jars to sanitize them for capturing yeast from my conical. I simply took a pint jar of boiled water and poured it into my blow-off container.

Thanks for your help Qhrumphf and kh54s10. I guess that's not so bad. Now I need to develop some kind of routine that highlights removal of the hose from the Blow-off container. I've done this before and I want to stop doing this. Little details seem to evade me.

Thanks flars, is there a way to calculate the ABV variation? OG 1.084 FG 1.011 Net ABV 9.8% Approx 10 to 12 ounces of blow-off water were added. Net ABV only means ABV without taking the dilution into account.

Double Damn, when I was kegging my beer into my 5 gallon Cornelius keg I neglected to remove my blow-off hose from the blow-off bucket. The vacuum sucked about 12 oz of blow-off water into my beer. Does anybody know how much this will affect my beer? Beer was a Pliney the Elder clone. The...