Recent content by vkmaynard

Great idea on the fermenter, post pictures. Thanks.

Don't think a fermenter will fit.

Thanks for posting. So my original guess was correct that this unit would work. Nice to know. Victor

Still working ok?

We use Perlick, works great. Not sure why it would make a difference. Victor

Did you get the correct size? Mine slide in/out with no problem. 5' line work great. Still foaming, add 3 sticks at 18 psi 44 deg, no problems.

Bought a ten pack last in June and put two in every keg and three in the Belgium keg. Works great and severely reduces the plumbing.

Does the beer seem cold enough? Foaming?

I've been keeping our beer around 44 deg with most beers set at your pressure of 14 PSI. The Belgium was set to 18 and a Red Oak clone 16. We have a dual output regulator that has been real helpful. I added (mandatory especially for picnic taps) the epoxy mixers to all our 5' lines supplied...

It wil take at least 24 hours to cool two kegs. The Johnson control shoud not be necessry since it is not a freezer. Just turn the cooler thermostat down to it's lowest setting and skip the Johson controler for now. Sorry about the late reply, I just got back into town last night. Please...

Well how's the Vassani project going?

The pressure relief at the gauge is nice since you don't have to relieve the pressure at the keg initially to set the pressure. Just turn off the valve to the keg, set the pressure; if it is too high then turn down the pressure, pull the relief valve and slowly turn the pressure back up, then...

The prices look the same. You are going to pay tax on either one since both companies are in TX. The Kegcoybow has a relief valve with knobs on on their base regulator which is an upgrade from kegconnection. Plus you can look at the kegs before you buy. Do you have to drive 200 mi to the...

That is exactly what I purchased. Then upgraded to the Taprite regulator for $35 because they the nice knobs like a regular compressor setup. I also purchased a third keg to rotate kegs. Take advantage of the $7.95 shipping.

Same problem. Had to tighten the screw on cap.