Recent content by twizted1

I have my E-Keggle setup on a rolling stand/storage rack, I have the pulley for my grain filter on the top rack and hook to the handle then hook the other end of the rope to the bottom shelf to hold the filter to drain/squeeze out the water. Image is from when I was first assembling the...

If you can find something to use as standoffs, and to screw to, you can install a plastic backing/back plate in your enclosure. Another option is to install your DIN rail or backing plate using the same screws/bolts that are mounting your box to something.

Fuzzy logic will "learn" as it is running and minimize your temperature over/undershoot.

If it's the same as my Frigidaire 9.0 cuft from Lowes (exterior dimensions are the same), it will fit 5 on the floor if you bend the compressor hump back some. The fifth keg won't fit without forcing it.

Several people have posted that the Frigidaire 9.0 cu ft from Lowes will hold 4 on the floor (the same freezer iirc is sold at Sears as a Frigidaire 8.8 cu ft). I've got all of my stuff together for a keezer, but haven't started building it yet. Since I have all my kegs, I took the time to...

The parts diagram will show what is end user serviceable, it will not show any coils that are encased in the refrigerator body due to them not being serviceable. If the sides of the fridge get warm while it's running then you have lines in the walls. If you drill then, you will need to proceed...

No regulator under a few hundred dollars will be that precise (I know because I just spent $900 on 2 regulators for the lab at work), most standard regulators are not precision instruments, they'll get you close, but it takes some tweaking. Learning how to adjust a non-precision regulator with...

The video is from 2007, doubtful anyone would keep it up for that long.

Jester, just another :mug: to your great keezer build! It's going to be the inspiration for the one I'm building. SWMBO is more willing to let one that looks nice live in the house rather than the shop!

Frigidaire 9.0 cu ft from Lowes Model # LFFC09M5HWL A - 35 3/4" B - 16 5/16" C - 28" (measures 28 3/4" and 3/4" of lid recesses into freezer body) D - 24 3/4" E - 10" F - 11" G - 18" (measures 18 3/4" and 3/4" of lid recesses into freezer body) H - N/A 1/4 round N/A Step is on left Only have...

A bit further than you probably think, but not too far. Outside of Cookeville, TN (bout and hour or so from Hendersonville). Have a pretty good local brewshop though.

New brewer from TN. I found your forum a year or so ago looking for kegerator ideas. Finally joined today. I've been making wine for about 7 years and just delved into the world of beer brewing. I'm working on my third batch with my first two currently carbing in the bottles. I've got a...