Recent content by tonari

Hi, i'm working on a dashboard to display the ispindel data and i'm stuck on the wifi RSSI data. Maybe i missed something... I use the last ispindel firmware and a php file to send the data from the ispindel to my online mysql databse. And then display the data on my dashboard. All informations...

Hi, so after a clean build, my data is now sent properly ! Now i have to calibrate the device. :)

Hi thanks a lot for the advice and the "how to" :) The part is really tiny that will be difficult, but i will try to do it and see if i can save this gy521. It's not really a price issue because it's really not expensive, but i don't like to throw away things like this.

Thanks guys, but i think that trying to fixe my lifted pads on the gy521 will be asking too much to my skills^^

Thanks for the tips, i will try to find this kind of wire on my local store and try this :)

Hi FowBall thanks, i indeed think that i have an issue between those two points. I checked with a multimeter and i don't have anything between RST and D0..., everything is ok at the BAT43 place, the problem is after that on the board. I orderer new composant and will start from scratch as soon...

Actually when i soldered the pcb i asked for the direction of the diode and we told me the wrong position, anode on the D0. So that's when i noticed my device had the problem i ask for here, and after that we told me to change the direction, that's what i did, now the catode is on the D0. I use...

I hope soo i'm on it since two days T_T I use the PCB from cherryfillip74 on gith. Here are some pictures: Yes and also when i go on the ispindel config, i can see my tilt change if y move it around. ps: sorry for the double post, i wanted to erase the first one because there was a link...

Hi gromitdj, thanks, actually when i soldered it at the first time it was in the wrong way, but now it's in the good position and still not working.

Hi guys, i'm struggling with my iSpindel and i can't find a clue or the answer to my issue. I have a wemos board v3.0.0 and i use a BAT43 between D0 and RST. I use the last v6.0.1 firmware. (but i also tried with 5.8.6) My wifi is configured and working inside the iSPindel. It sends info to my...