Recent content by time2trade

Just bought a dual product regulator. Attached to my CO2 tank, tightened everything up/ clamped all my connections tightly. Turned on the tank and the CO2 seems to just blow out of the second pressure release valve (furthest from tank). I assumed the regulator was pretty straight forward...

Reading many different opinions and technical explanations on how to store your co2 tank, but can anyone lend a simple definitive answer on this? Alot of people store their CO2 tanks inside their kegerator and I hear nothing negative about it, so I assume it is ok at 40F-ish? I know CO2...

Has anyone here directly compared these 3 methods in terms of effectiveness? I might assume using a sealed copper and fan method might work the best, but how much better and is it worth the time and effort? Cheers!

In a dual-keg kegerator setup (ball lock pepsi), does it make sense to use Ball Lock Disconnects (Pair) 1/4 MFL or Ball Lock Disconnects - Barbed? I'm just trying to go through this and figure out what makes better sense, since the gas lines don't have to be cleaned like the beer lines do...

Just to cover your bases, you should do 2 things: 1. Double-check the forums by doing a search for your fridge model; and 2. If that turns up nothing, provide the model number in your thread, as well as what you would like to hold in the fridge (# of keg(s), type of keg, size of CO2 tank, etc)...

Hi DeNomad - thanks for the great information. I'm looking forward to doing this build. Complete noob at it, but these directions look great. Wanted to ask for a visual on the step below. My questions are around it's setup using the tee, mounting the fan assembly in the project box, and...

Pretty much the same fridge, except the thermostat is in the centre of the fridge, rather than on the top-side...

I'm looking to hold 2 corny (pepsi) kegs and a 5lb cO2 tank. I suspect that this will be fine, but i'm putting it to the vets to let me know if this is fine to use. http://allgadgetnews.blogspot.ca/2012/04/danby-dar125sldd-44-cuft-all.html...

This might sound like a silly question (I have not ever done a conversion) but is there insulation between the whiteboard and outer door? If not, should there be?

No - i've had no response. :( Trying to dig deeper.

Hi Everyone. Fairly new to the boards, but have sifted through all of the great mini-fridge conversions and am a bit stuck. The problem is that most of these conversions are for versions of mini-fridges not available in Canada, or are now obsolete bar fridges... While I think I could...